| MODEL | 7130 | 7132 | 7140 | 7142 |
| AC WITHSTAND VOLTAGE |
| Output Rating | 5KVAC/20mA |
| Range | Resolution | Accuracy |
| Output Voltage，KVAC | 0-5.00 | 0.01 | ±( 2% of setting +5V ) |
| Output Frequency | 50Hz/60Hz±100ppm，User Selection |
| Output Waveform | Sine Wave，THD<2%( Resistion Load )，Crest Factor = 1.3-1.5 |
| Output Regulation | ±( 1% of output +5V )，Form no load full load |
| SETTINGS |
| Max-Limit AC Current，mA | 0-20.00 | 0.01 | ±( 2% of setting +2counts ) |
| Min-Limit AC Current，mA | 0-9.999 | 0.001 | ±( 2% of setting +2counts ) |
| Ramp Time，second | 0-999.9 | 0.1 | ±( 0.1% + 0.05sec ) |
| Dwell Time，second | 0，0.3-999.9 | 0.1 |
| ( 0=continuous ) |
| Arc Detection | 0，1-9 ranges ( 0=OFF，9 is the most sensitivity ) |
| DC WITHSTAND VOLTAGE（7140，7142 ONLY） |
| Output Rating | 6KVDC/7500uA |
| Output Voltage，KVDC | 0-6.00 | 0.01 | ±( 2% of setting +5V ) |
| Output Ripple | < 5% ( 6KV/7500uA at Resistive Load ) |
| SETTINGS |
| Max-Limit DC Current，uA | 0-7500 | 1 | ±( 2% of setting +2counts ) |
| Min-Limit DC Current，uA | 0-999.9 | 0.1 | ±( 2% of setting +2counts ) |
| Ramp Time，second | 0.1-999.9 | 0.1 | ±( 0.1% + 0.05sec ) |
| Dwell Time，second | 0，0.4-999.9 | 0.1 |
| ( 0=continuous ) |
| Arc Detection | 0，1-9 ranges ( 0=OFF，9 is the most sensitivity ) |
| Discharge Time | ≦200msec |
| INSULATION RESISTANCE ( 7132，7142 ONLY ) |
| Output Rating | 1KVDC/9999MW |
| Output Voltage，VDC | 30-1000 | 10 | ±( 2% of setting +3V ) |
| SETTINGS |
| Max-Limit Resistance，MW | 0，1-9999（0=OFF ) | 1 | ±(2% of setting +2counts) at 500-1000VDC，1-1000M |
| Min-Limit Resistance，MW | 1-9999 | 1 | ±(5% of setting +2counts) at 500-1000VDC,1000-9999M |
| ±(8% of setting +2counts) at 30-500VDC,1-1000M |
| Ramp Time，second | 0.1-999.9 | 0.1 | ± ( 0.1% + 0.05sec ) |
| Dwell Time，second | 0，1.0-999.9 | 0.1 |
| Delay Time，second | 0，0.5-999.9 | 0.1 |
| ( 0=continuous ) |
| GENERAL |
| Input Voltage AC | 115/230VAC±15%，50/60Hz±5%，Fuse 3.15A Fast |
| PLC Remote Control | Input: Test，Reset，Memory1.2.3，Interlock |
| Output: Pass，Fail，Processing |
| Interface( Option ) | RS485 Interface |
| Memory | 10memories，3 steps/Memory |
| Display | 128×64 Graphic LCD |
| Safety | Built-in Smart GFI trip current 450uA max，HV shut dowm speed : <1mS |
| Key Lock | To prevent unauthorized alteration of test parameters |
| Calibration | Build-in software and external calibrated meters |
| Verification | Build-in software driven verification menu to test fault detection circuits |
| Alarm Volume Setting | Range : 0-9;0=OFF，1 is softest volume，9 is loudest volume |
| Environment | 0-40℃，20-80%RH |
| Dimension/Net Weight | 215mm(W)×89mm(H)×370mm(D)/10Kg |
| ※Ordering Information※------------------------------------------------------------------------------------ |
| 7130 AC Withstand Voltage Tester |
| 7132 AC Withstand Voltage / Insulation Resistance Tester |
| 7140 AC/DC Withstand Voltage Tester |
| 7142 AC/DC Withstand Voltage / Insulation Resistance Tester |
