仪器简介：
MULTI-HOMO
The MULTI-HOMO is fitted as standard with a two-speed homogenizer. Raw
materials are introduced directly into the homogenizer through a stator
support in the form of an intake tube. By means of this intake system,
hot/cold emulsification can be produced very quickly with low energy
requirements. Additional raw material inlets, especially for automatic
process, can be provided in the lid and the bottom of the mixing tank,
directly under the turbine of the homogenizer.Other emulsions can be
produced in the same manner whereby the phase to emulsify only comes
into contact with the base phase in the homogenizer. The rapid treatment
in the homogenizer prevents phase reversal.
Function principle
In processing systems, short mixing times are mainly achieved by
intensive, three-dimensional movements in which usually several mixing
tools take part. In addition to the actual mixing task, the selection
of the different interacting mixing elements is principally dependant
upon product viscosity, mixing tank dimensions and mixing tool speeds.
Further requirements to be taken into account include:
1.favourabele heat transfer
2.efficient deaeration
3.homogenization
技术参数：
COLLOVELOX
Function principle
Products with maximum particle refinement (dispersion, homogenizing
down to 200 nm) particle solubilize (equable lumpfree swelling of
powders in liquid). The colloidal mill COLLOVELOX works with a
special rotor/stator construction. This construction allows to work
with high pressure, mechanical cutting, centrifugal impact,
compression and friction power.
An additional speciality is the variable gap adjustment between rotor
and stator to the needs of the product. Adjustment of the gap can be
accomplished while the mill is in use.
A special pumping wheel, fixed to the rotor is responsible for the
feeding of the product. Over a powder sucking system (optional) it is
possible to create vacuum and to suck powder or liquid directly into
the mixing area.
The special advantage of a COLLOVELOX colloidal mill is its flexibility.
The system can be adapted to an existing infrastructure
at the customer's facility and it's specific needs: fix installation/
moveable; adjustment to existing product viscosities; in-line/
recirculation system; powder dosing over a hopper/ suction pipe. The
capacity range of the colloidal mill COLLOVELOX goes from 340 l/h
up to 32.000 l/h(related to water).
主要特点：
EML
Function principle
Sucking of powder and/or liquid into a receiver liquid. The powder
suction system.
EML is working according the ?Venturi-Principle“. After a speed up
of a receiver liquid with a pump through the injector nozzle, a
vacuum will be created inside of the mixing chamber. The injector
nozzle can be changed easily by hand to fit the different powder
types and/or powder amount. Because of the generated vacuum in the
chamber the powder and/or liquid will be sucked onto the top of the
jet stream particle by particle, moistened therefore and carried away
by the jet stream immediately. Based on this special system the air
in the powder is swimming with big bubbles on the surface of the
liquid stream and can easily disappear after the entrance in a tank.
Advantage of the system: no air in the product and less of foam on the top.
The special advantage of the system EML is its flexibility.
The system can be adapted to the existing infrastructure of the
customer's facility and its specific needs: fix installation /
moveable; adjustment to existing product viscosities;
inline/recirculation system, powder dosing over a hopper / suction
pipe / Big-Bag; dosing by hand/ over an automatic dosing system. The
powder injection system EML is suitable for capacities from 0 up to
70 kg/min.
MULTI-HOMO
The MULTI-HOMO is fitted as standard with a two-speed homogenizer. Raw
materials are introduced directly into the homogenizer through a stator
support in the form of an intake tube. By means of this intake system,
hot/cold emulsification can be produced very quickly with low energy
requirements. Additional raw material inlets, especially for automatic
process, can be provided in the lid and the bottom of the mixing tank,
directly under the turbine of the homogenizer.Other emulsions can be
produced in the same manner whereby the phase to emulsify only comes
into contact with the base phase in the homogenizer. The rapid treatment
in the homogenizer prevents phase reversal.
Function principle
In processing systems, short mixing times are mainly achieved by
intensive, three-dimensional movements in which usually several mixing
tools take part. In addition to the actual mixing task, the selection
of the different interacting mixing elements is principally dependant
upon product viscosity, mixing tank dimensions and mixing tool speeds.
Further requirements to be taken into account include:
1.favourabele heat transfer
2.efficient deaeration
3.homogenization
技术参数：
COLLOVELOX
Function principle
Products with maximum particle refinement (dispersion, homogenizing
down to 200 nm) particle solubilize (equable lumpfree swelling of
powders in liquid). The colloidal mill COLLOVELOX works with a
special rotor/stator construction. This construction allows to work
with high pressure, mechanical cutting, centrifugal impact,
compression and friction power.
An additional speciality is the variable gap adjustment between rotor
and stator to the needs of the product. Adjustment of the gap can be
accomplished while the mill is in use.
A special pumping wheel, fixed to the rotor is responsible for the
feeding of the product. Over a powder sucking system (optional) it is
possible to create vacuum and to suck powder or liquid directly into
the mixing area.
The special advantage of a COLLOVELOX colloidal mill is its flexibility.
The system can be adapted to an existing infrastructure
at the customer's facility and it's specific needs: fix installation/
moveable; adjustment to existing product viscosities; in-line/
recirculation system; powder dosing over a hopper/ suction pipe. The
capacity range of the colloidal mill COLLOVELOX goes from 340 l/h
up to 32.000 l/h(related to water).
主要特点：
EML
Function principle
Sucking of powder and/or liquid into a receiver liquid. The powder
suction system.
EML is working according the ?Venturi-Principle“. After a speed up
of a receiver liquid with a pump through the injector nozzle, a
vacuum will be created inside of the mixing chamber. The injector
nozzle can be changed easily by hand to fit the different powder
types and/or powder amount. Because of the generated vacuum in the
chamber the powder and/or liquid will be sucked onto the top of the
jet stream particle by particle, moistened therefore and carried away
by the jet stream immediately. Based on this special system the air
in the powder is swimming with big bubbles on the surface of the
liquid stream and can easily disappear after the entrance in a tank.
Advantage of the system: no air in the product and less of foam on the top.
The special advantage of the system EML is its flexibility.
The system can be adapted to the existing infrastructure of the
customer's facility and its specific needs: fix installation /
moveable; adjustment to existing product viscosities;
inline/recirculation system, powder dosing over a hopper / suction
pipe / Big-Bag; dosing by hand/ over an automatic dosing system. The
powder injection system EML is suitable for capacities from 0 up to
70 kg/min.
