Piezoresistive Pressure Tranitters Series 26 W
For Level- and High Precision Pressure Measurements
The Series 26 W tranitter utilises the Series 10 piezoresistive capsule, which is housed inside a submersible 316 L stainless steel body as standard.
For corrosive applications hastelloy diaphragms and other materials are available as options. Series 26 W vented gauge versions have cable with integral vent tube. These tranitters are fitted with durable PE cable.
Pressure Ranges | 0,2...20 bar (relative) | ||||||||||||||
Output | 0...10 V 0...20 mA 4...20 mA | ||||||||||||||
Linearity | t. 0,2 %FS | ||||||||||||||
Stability, Range 500 mbar Stability, Range > 1 bar | t. 1 mbar
Intrinsically Safe Piezoresistive Pressure Tranitters These piezoresistive pressure tranitters are approved for use in highly explosion risk areas of group II (gas and dust).
Capacitive Tranitters Series 46 X / 46 X Ei For Water Level Measurements The Series 46 X combines the ceramic measuring cell for low pressure ranges with the µP-electronics of the dial Series 30 pressure tranitters. The signal values of the pressure- and temperature sensors are determined by a polynomial compensation. The values can be shown and stored on a PC and can be reprogrammed. A reference tube integrated in the cable connects the referential chamber of the sensor with the ambient pressure. This pressure tranitter is also available as intrinsically safe version (Series 46 X Ei). It is used in explosion exposed areas, where the categories 1 and 2 are required.
Note: |