We offerfactory calibrationsfor our products as an additional service in which we check compliance with the specified tolerances and make adjustments if necessary. The results are documented in a calibration certificate. The standards used for the reference measurements are based on national standards. Regularly conducted factory calibrations ensure the reliability of your measurements.

Hanging dynamometer ZW 1.0

Our fully electronic ZW 1.0 hanging dynamometer is designed for measurement of weights up to 1000 kg. The outstanding features of the scales are the low self-weight and the compact construction. The scales are easily adapted with shackles or hooks.

The measured value is read out on a hand terminal connected to the scales by cable. The measured value is displayed in 1 kg increments.

Applications
Weighings in industry and agricultural sector
Crane scales
Tension and traction measurement

Product information ZW1.0 as pdf-file

Hanging dynamometer ZW 2.0

Our ZW 2.0 hanging dynamometer has a high resolution. In its nominal load range of up to 1000 kg, the measured value is displayed on the integrated display in increments of 0.1 kg.

The robust construction and IP64 protection mean that the scales can also be used outdoors. The scales are integrated between the load pick-up and the goods being weighed.

Applications
Weighings in industry and agricultural sector
Crane scales
Tension and traction measurement

Hanging dynamometer ZW 2.1

The hanging dynamometer ZW 2.1 is available for the load ranges up to 1000 kg and up to 2000 kg. The hanging dynamometer for up to 1000 kg displays readings in 0.1 kg steps. The hanging dynamometer for loads up to 2000 kg displays its readings in 1 kg steps.

In contrast to the ZW 2.0, this dynamometer has rotatable eyebolts. With its robust construction and degree of protection IP 64, this scale is suitable for use outdoors.

Applications
Weighing operations in industry and agriculture
As a crane scale
Measuring tension forces / dynamometer

Dynamometer ZW 5.0

The special feature of the Te ZW 5.0 dynamometer is the all size of its sensor. This makes it particularly suitable for applications where space is restricted. This dynamometer is designed for loads up to 500 kg. It can also be used for measuring forces up to 5000 N.

Readings can be displayed on a hand terminal which is connected by a cable to the sensor. The sensor can be adapted to different applications by means of spherical rod ends and eyebolts.

Applications
Dynamometer
Force gauge
Tensile and compressive applications

Product information ZW5.0 as pdf-file

Dynamometer ZW 6.0, 7.0 and 8.0

These dynamometers consist of a shear force load cell and a hand terminal which is connected by a cable. Depending on the te, the load capacity is from 1000 kg to 10000 kg. These dynamometers can also be used for force measurement. The load ranges are then between 10 kN and 100 kN.

The sensor can be easily adapted to different applications by means of spherical rod ends and eyebolts.

Applications
Tension scale
Force gauge
Tensile and compressive applications

Product information ZW 6.0 as pdf-file
(for loads up to 2000 kg / 20kN)

Product information ZW 7.0 / ZW 8.0 as pdf-file
(for loads up to 10 t / 100 kN)