供应MSE-LT150工业用激光测距仪（英文资料）
| 价 格： | 面议 | |
| 型号/规格： | MSE-LT150 | |
| 品牌/商标： | MSE |
The MSE-LT150 Laser Distance Meter operates over a substantial range off static or passing product in difficult areas in harsh environment. The MSE-LT150 measure distance over a working range up to 30 meters off of natural surfaces, up to 100 meters off of white surface and up to 150 meters off of a special reflector. For operation with automiated positioning control of material handing transport systems a white reflective target is used or the special reflector is used.
Especially suited for precise detection and measurement of cole/ hot product at temperatures up to 600degeree. For higher products temperature a Modle MSE-LT150 is available for measuremnet of cold/hot products at product temperature up to 1200degree.
Straightforward alignment is easily accomplished via the visible red laser measuring beam.
Accuracy is +/- 2mm to +/- 5mm according to ambient temperature and surface reflectivity. Repeatability is +/_ 0.5mm and the user scalable resolution is 0.1 mm.
Rhe zero offset and the span of the 4-20 mA analog output are both user programmable. The distance offset is also user programmable, this allows the user to define a zero point independent of the analog output zero offset.
Provided with a user progrannable digital switching output which is triggered by exceeding in the positive or negative direction a user programmable distance threshold. The hysteresis of the digital switching output is also programmable.
This Robust Laser Distance Meter with bulit-in air coolant chamber venting as air purge. Standard operating temperature without air cooling is 50 degree and with air cooling is 60degree. Optional water cooling is available for an operating temperature up to 70 degree.
The MSE-LT150 Laser Distance Meter provides a highly accurate measurement reading. It is ideal for length and width determination, and checking position of product in and around furnace areas.
Supplied as standard with a switch selectable RS232&RS422 serial interface with a 2400 to 38, 400Baud Rate& a programmable 4-20mA 16BIT analog output and Ethernent.
- 所属城市：山东 烟台
- [联系时请说明来自维库仪器仪表网]
- 联系人： 刘先生
- 电话：0535-2161086/060
- 传真：0535-2161090
- 手机：18953569688
- QQ ：
供应MSE-PF100 扫描式热金属检测器
信息内容：MSE-PF1000型电子扫描式热金属检测器使用线阵锗二极管阵列作为检测器件，仪表内部的微处理器通过对阵列上每个锗二极管的循环扫描，可以得到每个二极管所接收到的热辐射电平值，通过对这些电平信号的比较分析，就可以从复杂的背景信号中精确快速的识别出热金属信号。因为它采用的是将热金属信号与背景热辐射信号相对比的方法（水涨船高、剔除背景噪音的的方法），所以不论是静态的红热铁屑还是动态的水雾、蒸汽都不会使仪表产生误触发。另外，镜头的脏污也不会提升触发电平，这样就保证了热金属检测的可靠性、精确性和快速性。 MSE-PF1000型扫描式热检利用电子扫描替代传统的光学棱镜扫描，省去了对旋转部件的维护，提高了扫描的可靠性。而传统的静态模拟式热检HMD只使用一个光电二极管单纯的检测超过设定门槛的红外信号，容易受到水雾和现场背景热辐射的影响。
供应MSE-HMD85数字式热金属检测器（英文资料）
信息内容：The MSE-HMD85 is a fully digital "All-in One"Hot Metal Detectoer uniquely incorporating a bar display showing the %IR input sinal relative to the pre-set threshold as well as programmable thresholds and reponse times via simple programming switch action. this and the univerial connection format means it provides the user with one universal Dector that can be used throughout the mill. The MSE-HMD85 is the econmical choice. Now there is no need to stock varius Dectors for each for each location. Costly mulitiple inventory can be replaced by one Detector. The MSE-HMD85 Hot Metal Dector is a robust sensor activated by the infraa-red radiating from the hot product. Impervious to water or steam it is bulit to withstand the harshest of the enviroments. The product is detected via a highly stable In GaAs Photodiode to ensure detection regardless of heavy water and steam and incorporates filtering that removes the visiblespectrum to minimize sensitivity ti extraneous light. The precise 1 d...
