供应OMRON欧姆龙编码器E6C2-CWZ5G 600P/R现货
| 价 格： | 1.00 | |
| 型号/规格： | E6C2-CWZ5G 600P/R | |
| 品牌/商标： | OMRON |
E6C2-CWZ5G 600P/R
信号输出有正弦波（电流或电压）,方波（TTL、HTL）,集电极开路（PNP、NPN）,推拉式多种形式，其中TTL为长线差分驱动（对称A,A-;B,B-;Z,Z-）,HTL也称推拉式、推挽式输出，编码器的信号接收设备接口应与编码器对应。 信号连接—编码器的脉冲信号一般连接计数器、PLC、计算机，PLC和计算机连接的模块有低速模块与高速模块之分，开关频率有低有高配线，则有时会受到感应造成误动作成损坏，所以要分离开另行配线。 ④ 延长电线时，应在10m以下。并且由于电线
and the cable type.
min
保护回路
负载短路保护、电源反接保护
• Extending the cable length not only changes the startup time, but
also increases the output residual voltage.
- 所属城市：广东 深圳
- [联系时请说明来自维库仪器仪表网]
- 联系人： 刘先生/林小姐
- 电话：0755-36956963/82597357
- 传真：0755-27383735
- 手机：18902436749/13590212016/13723727879
- QQ ：
供应OMRON欧姆龙编码器E6C2-CWZ6C 720P/R现货
信息内容：E6C2-CWZ6C 720P/R 另每转输出一个Z相脉冲以代表零位参考位。 由于A、B两相相差90度，可通过比较A相在前还是B相在前，以判别编码器的正转与反转，通过零位脉冲，可获得编码器的零位参考位。 编码器码盘的材料有玻璃、金属、塑料，玻璃码盘是在玻璃上沉积很薄的刻线，其热稳定性好，精度高，金属码盘直接以通和不通刻线，不易碎，但由于金属有一定 500Hz 上下振幅 2mm或150m/s2 X、Y、Z各方向扫频11min/次 扫频3次 冲击(耐久) 1,000m/s2 X、Y、Z es may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on y
供应OMRON欧姆龙编码器E6C2-CWZ5G 360P/R现货
信息内容：E6C2-CWZ5G 360P/R LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination ...
