E6C2-CWZ6C 720P/R
另每转输出一个Z相脉冲以代表零位参考位。 由于A、B两相相差90度,可通过比较A相在前还是B相在前,以判别编码器的正转与反转,通过零位脉冲,可获得编码器的零位参考位。 编码器码盘的材料有玻璃、金属、塑料,玻璃码盘是在玻璃上沉积很薄的刻线,其热稳定性好,精度高,金属码盘直接以通和不通刻线,不易碎,但由于金属有一定
es may be changed at any time based on improvements and other reasons.
500Hz 上下振幅 2mm或150m/s2 X、Y、Z各方向扫频11min/次 扫频3次
冲击(耐久)
1,000m/s2 X、Y、Z
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on y
E6C2-CWZ5G 360P/R LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination ...
E6C2-CWZ5GH 400P/R 出电压:5V负载电 阻1kΩ、导线长度:2m) 1μs以下 (导线 动,往往会成为误脉冲发生的原因。因此,应对设置场所、安装场所加以注意。每转发生的脉冲数越多,旋转槽圆盘的槽孔间隔越窄,越易受到振动的影响。在低速旋转或停止时,加在轴或本体上的振动使旋转槽圆盘抖动,可能会发生ly 9 A will flow for approximately 0.3 ms when the power is turned ON. *2. The line driver output is a data transmission circuit compatible with RS-422A and long-distance transmission is possible with a twisted-pair cable.(AM26LS31 equivalent) *3. The maximum electrical response speed is deter