NRP05 | 18.2×10.2×15.2 |
• 10A switching capability • SPST-NO configuration • Standard PC layout • Sealed type available • Surge resistance of 5000V • Conform to RoHS,ELV directive | |
触点参数 | |
触点形式 | 1H |
触点材料 | Silver Alloy |
负载 | Resistive load(COSØ=1) |
触点负载 | 10A 250VAC |
最小负载 | 100mA 5VDC |
转换电压 | 277VAC/30VDC |
转换电流 | 10A |
转换功率 | 2500VA/300W |
接触电阻 | 100mΩMax at 6VDC 1A |
电气寿命 | 100,000 Operations(at30Operations/minute) |
机械寿命 | 10,000,000 Operations(at300Operations/minute) |
性能参数 | |
绝缘阻值 | 100MΩMin at 500VDC |
触点间耐压 | 1000VAC(for one minute) |
触点与线圈间耐压 | 4000VAC(for one minute) |
吸合时间 | 10ms |
释放时间 | 4ms |
环境温度 | -40°Cto+85°C |
冲击 | Operating Extremes动作极限: 10G |
Damage Limits破坏极限: 100G | |
振动 | 10-55Hz, 1.5mm双振幅 |
转换频率 | Mechanical:18,000operations/hr Electrical:1,800operations/hr |
湿度 | 40-85% |
重量 | Approx 6g |
安规标准 | |
UL & cUL | 8A 240VAC |
线圈参数 at 20°C | ||||
额定线圈功率 0.45W | ||||
额定电压 VDC |
额定电流 mA |
吸合 电压VDC |
最小释放 电压VDC |
线圈电阻 (Ω±10%) |
3 | 150 | 2.25 | 0.15 | 20 |
5 | 89.28 | 3.75 | 0.25 | 56 |
6 | 75 | 4.5 | 0.3 | 80 |
9 | 50 | 6.75 | 0.45 | 180 |
12 | 37.5 | 9 | 0.6 | 320 |
18 | 25 | 13.5 | 0.9 | 720 |
24 | 18.75 | 18 | 1.2 | 1280 |
dzsc/18/2300/18230075.jpg features: Transient protection for data & power lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) Protect four I/O lines Ultra-small SC70-5 / SC88A / SOT353 Working Voltages: 5V Low Leakage current Low operating and clamping voltage Solid-state silicon avalanche technology Description: The UESD54B of TVS diode array is designed to protect sensitive electronics from damage or latch-up due to ESD, for use in applications where board space is at a premium. It is unidirectional device and may be used on lines where the signal polarities are above ground, each device will protect up to four lines. TVS diodes are solid-state devices feature large cross-sectional area junctions for conducting high transient currents, specifically for transient suppression. It offers desirable characteristics for board level protection including fast response time, low operating, low clamping voltage, and no device degradation. The UESD54B may be used to meet the im...
特点: Current-Mode Type PWM Control Built-in Random Switching FunctionThe function reduces the EMI noise and enables a simplified (low-cost) EMI filter,by the slight- random-change of PMW frequency fOSC. Auto-Standby Function: The burst-oscillation enables the low standby power. Input Power PIN < 25mW at no load Built-in Startup Circuit, enabling low power consumption Brown-In / Brown-Out FunctionThe function enables the oscillation start/stop by externally rated input voltage and makes protections at low inputvoltage. Overcurrent Protection (OCP) with Built-in Input Compensation Circuit:The protection has less AC input voltage dependency. Overload Protection (OLP) with Built-in Delay Timer High Speed Latch Release FunctionThe function releases the latch immediately at AC supply OFF, after the latch protection operation. Bias-Assist Function, reducing Operating VCC voltage dropThe function improves the startup operation and makes a low VCC capacitor applicable. Lead...