| Bitmap |
| Hubei Kento Electronic Co., Ltd |
| 发光二管产品规格书 |
| Specification for LED Product |
| 产品型号：5KR2UD09 | | | | | |
| ■尺寸规格(毫米) | | | | | | |
| Package Dimensions(mm) | | | | | | |
| | Bitmap | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| 注解: | | | | | | |
| Notes: | | | | | | |
| 1．尺寸单位是mm | | | | | | |
| All dimension units are millimeters. | | | | | |
| 2．未标注尺寸公差为&plun;0.2mm | | | | | |
| All dimension tolerance is &plun;0.2mm unless otherwise noted. | | | | |
| 3．胶体底部与引脚处多胶部分大约为1.5mm | | | | |
| An epoxy meniscus may extend about 1.5mm down the leads. | | | | |
| 4．胶体底部毛边小于等于0.5mm | | | | | |
| Burr around bottom of epoxy may be 0.5mm max. | | | | | |
| | | | | | | |
| 简介: | 5.2mm椭圆形 | | | 红色散射胶体 | | |
| Synopsis: | 5.2mm Oval Te | | | Red Diffused Lens | |
| | 红色发光二管 | | | | | |
| | Red LED Lamp | | | | | |
| | | | | | | |
| 0, 7, 41, 50, 0, 135, 43, 55 Bitmap |
| Hubei Kento Electronic Co., Ltd |
| 产品型号：5KR2UD09 | | | | | |
| ■主要光电特性(室温= 25℃)Tical Electrical & Optical Characteristics (Ta = 25℃) |
项目
ITEMS | 号 | 条件 | 小值 | 典型值 | 值 | 单位 |
| SYOL | CONDITION | MIN. | T. | MAX. | UNIT |
| 正向电压 | VF | IF = 20mA | 1.4 | 1.8 | 2.3 | V |
| Forward Voltage |
| 反向电流 | IR | VR = 5V | --- | --- | 1.1 | μΑ |
| Reverse Current |
| 主波长 | &lada;D | IF = 20mA | 620 | --- | 630 | nm |
| Dominant Wavelength |
| 发光强度 | IV | IF = 20mA | 250 | 338 | 423 | mcd |
| Luminous Intensity |
| 50%能量发光视角 | 2θ½ | IF = 20mA | --- | 34 | --- | deg |
| 50% Power Viewing Angle |
| ■额定值(室温= 25℃)Absolute Maximum Ratings at (Ta = 25℃) | | |
| 项目 | 号 | 额定值 | 单位 |
| ITEMS | SYOL | ABSOLUTE MAXIMUM RATING | UNIT |
| 正向电流 | IF | 50 | mA |
| Forward Current |
| 峰值正向电流 | IFP | 220 | mA |
| Peak Forward Current |
| 连续工作电流 | IL | 20 | mA |
| Continuous Forward Current |
| 反向电压 | VR | 5 | V |
| Reverse Voltage |
| 功耗 | PD | 90 | mW |
| Power Dissipation |
| 工作温度 | Topr | -40 ~ +80 | ℃ |
| Operation Temperature |
| 贮存温度 | Tstg | -40 ~ +80 | ℃ |
| Storage Temperature |
| 引脚镀锡温度 | Tsol | 温度260℃,长时间5秒 |
| Lead Soldering Temperature | Max.260°C for 5 sec Max. |
| | | | | | | |
| IFP条件：脉冲宽度小于等于10分钟 | | | | | |
| IFP Conditions：Pulse Width≤10msec duty≤1/10 | | | | | |
| Tsol条件：离胶体底部4mm处为基础 | | | | | |
| Tsol Conditions：4mm from the base of the epoxy bulb | | | | |
| Bitmap | | | | | | |
| 湖 北 匡 通 电 子 有 限 公 司 |
| Hubei Kento Electronic Co., Ltd |
| 产品型号：5KR2UD09 | | | | | |
| ■半功视角 | | | | | | |
| Spatial Distribution | | | | | | |
| Bitmap | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| ■性试验 | | | | | | |
| Reliability Performance | | | | | | |
| 测试分类 | 测试项目 | 测试条件 | 测试持续时间 | 抽样大小 | 判定 |
| Test Clification | Test Item | Test Conditions | Test Duration | Sample Size | Standard |
| 寿命测试 | 寿命测试 | Ta=25℃&plun;5℃，IF=20mA | 1000小时(hrs) | 10PCS | |
| Life Test | Life Test |
| | 热冲击测试 | -10℃&plun;5℃←→+100℃&plun;5℃ | 100循环(cycles) | 10PCS | |
| | Thermal Shock Test | 5min. 10sec. 5min. |
| | 冷热循环测试 | -55℃&plun;5℃←→+85℃&plun;5℃ | 100循环(cycles) | 10PCS | |
| | Temperature Cycle Test | 30min. 5min. 30min. |
| 环境测试 | 高温高湿测试 | Ta=85℃&plun;5℃ | 240小时(hrs) | 10PCS | |
| Environment Test | High Temperature ＆ | RH =85%&plun;0.5 %RH |
| | High Humidity Test |
| | 高温贮存测试 | Ta=100℃&plun;5℃ | 1000小时(hrs) | 10PCS | |
| | High Temperature |
| | Storage |
| | 低温贮存测试 | Ta=-55℃&plun;5℃ | 1000小时(hrs) | 10PCS | |
| | Low Temperature |
| | Storage |
| | 焊接热度 | Ta=260℃&plun;5℃ | 5秒(sec.) | 10PCS | |
| 机械测试 | Resistance to |
| Mechanical Test | Soldering Heat |
| | 引脚折弯 | 负荷2.5牛顿(0.25千克) | 3回合(times) | 10PCS | |
| | Lead Integrity | 0° ~ 90° ~ 0° | |
| | | | | | | |
| Bitmap |
| Hubei Kento Electronic Co., Ltd |
| 产品型号：5KR2UD09 |
| ■典型的光电特性曲线 (Ta=25℃ 除非不同地方) | | | | |
| Tical Optical/Electrical Characteristics Curves (Ta=25℃Unless Otherwise Noted) | | |
| | | | | | | |
| Bitmap Bitmap | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | 电流-电压曲线 | | |
| | | | Current-Voltage Curve | | |
| | | | | | | |
| Bitmap Bitmap | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| 电流-光强曲线 | | 电流-光通量曲线 | |
| Current-Luminous intensity Curve | | Current-Luminous flux Curve | |
| | | | | | | |
| Bitmap | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | 波长 | | | | |
| | Wavelengt | | | | |
| Bitmap | | | | | | |
| 湖 北 匡 通 电 子 有 限 公 司 |
| Hubei Kento Electronic Co., Ltd |
| 产品型号：5KR2UD09 | | | | | |
| 1.应用 |
| 此LED可使用于一些普通的电子设备，例如办公设备，通信设备、房屋装饰，若LED用在一些性要 |
| 求较高的情况下，如航空运输，交通控制及医辽器械时，需参考销售提供之资料进行使用。 |
| 2.贮存 |
| 贮存LED的环境，温度不过30℃，相对湿度不过70%。 建议LED在原包装箱里日期不过三个月 |
| 进行使用，如果需加长贮存时间，建议放在干燥箱内，并加放干燥剂，或者充入氮气。 |
| 3.清洗 |
| 当用化学品清洗胶体时须小心，因为有些化学品对胶体表面有损伤并引起褪色，如三氯乙烯、 |
| 等。可用乙醇擦拭、浸渍，时间在常温下不过3分钟。 |
| 4.引脚装配 |
| （1）需离胶体2毫米才能折弯支架。 |
| （2）支架成形须用夹具或由人员来完成。 |
| （3）支架成形须在焊接前完成。 |
| （4）支架成形需引脚和间距与线路板上一致。 |
| （5）焊接须在正常温度下进行，当LED正常焊接到PCB板上后，应尽量避免在LED引脚处施加机械压力。 |
| Bitmap |
| 5.焊接 |
| 当焊接时，需在胶体底部2mm以下进行焊接，在焊接时，应尽力避免浸渍LED胶体，在刚焊接完后， |
| 应避免在引脚上加外力或者摇动LED胶体。 |
| Pict | | |
| | | |
| | | | | |
| | | | | |
| | | | | | |
| | | | | |
| | | | |
| 6.驱动方式 | | | | | | |
| LED的当前驱动方式 | | | | | | |
| 若LED为多颗并联时，建议采用线路A，在每颗LED处加一限流电阻，以LED之亮度一致。 |
| Circuit model A | Circuit model B | | |
| Bitmap Bitmap
提示：您在维库仪器仪表网上采购商品属于商业贸易行为。以上所展示的信息由卖家自行提供，内容的真实性、准确性和合法性由发布卖家负责，请意识到互联网交易中的风险是客观存在的。 请广大采购商认准带有维库仪器仪表网认证的（金牌会员、VIP会员、至尊VIP会员、百维通）供应商进行采购！
手机访问 
|
