E6H-CW6C 1500P/R
接地的除外
耐电压
电容器接地的除外
振动(耐久)
10~500Hz
E6H-CWZ6C, E6H-CWZ3E
集电极开路输出
电压输出
集电极开路输出 * 4
输出容量
外加电压:DC35V以下
4.2-dia. shielded cable with 5 conductors
(Conductor cross section: 0.1 mm
2
,
Insulator diameter: 0.88 mm), Standard
length: 500 mm
E6H-CWZ3X
5.5-dia. shielded cable with 8 conductors
(Conductor cross section: 0.1 mm
2
,
Insulator diameter: 1.0 mm), Standard
E6H-CW6C 700P/R ● Wiring Spurious pulses may be generated when power is turned ON and OFF. Wait at least 0.1 s after turning ON the power to the Encoder before using the connected device, and stop using the connected device at least 0.1 s before turning OFF the power to the Encoder. Also, turn ON the power to the load only after turning ON the power to the Encoder. 连接方式 导线引出式(标准导线长 500mm) 材质 外壳 铁 本体 铝 板簧 SUS304 质量(捆包状态) 约120g
E6H-CWZ6C 150P/R It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liabi...