供应OMRON欧姆龙编码器E6C2-CWZ6C 30P/R现货
| 价 格： | 1.00 | |
| 型号/规格： | E6C2-CWZ6C 30P/R | |
| 品牌/商标： | OMRON |
E6C2-CWZ6C 30P/R
000 r/min
Protection circuits Power supply reverse polarity protection, Load short-circuit protection ---
Ambient temperature
range
Operating: −10 to 70°C (with no icing), Storage: −25 to 85°C (with no icing)
Ambient humidity
range
Operating/Storage: 35% to 85% (with no condensation)
Insulation resistance 20 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 500 VAC, 50/60 Hz for 1 min between current-c
冲击时，可能会损坏内部功能，使用上应充分注意。安装 安装时不要给轴施加直接的冲击。 编码器轴与机器的连接
0r/min
保护回路
负载短路保护、电源反接保护
-
环境温度范围
工作时：-10～+70°C、保存时：-25～+85°C (无结冰)
环境湿度范围
工作时、保存时：各
- 所属城市：广东 深圳
- [联系时请说明来自维库仪器仪表网]
- 联系人： 刘先生/林小姐
- 电话：0755-36956963/82597357
- 传真：0755-27383735
- 手机：18902436749/13590212016/13723727879
- QQ ：
供应OMRON欧姆龙编码器E6C2-CWZ5B 2048P/R 现货
信息内容：E6C2-CWZ5B 2048P/R ltage: 30 VDC max. Sink current: 35 mA max. Residual voltage: 0.4 V max. (at sink current of 35 mA) Applied voltage: 30 VDC max. Source current: 35 mA max. Residual voltage: 0.4 V max. (at source current of 35 mA) Output resistance: 2 kΩ Output current: 20 mA max. Residual voltage: 0.4 V max. (at sink current of 20 mA) AM26LS31 equivalent Output voltage: High level: IO = −20 mA Low level: IS = 20 mA Output voltage: VO = 2.5 V min. VS = 0.5 V max. Maximum response frequency*3 100 kHz 50 kHz 1 电压：5V负载电 阻1kΩ、导线长度：2m) 1μs以下 (导线长 一般连接计数器、PLC、计算机，PLC和计算机连接的模块有低速模块与高速模块之分，开关频率有低有高。 如单相联接，用于单方向计
供应OMRON欧姆龙编码器E6C2-CWZ5GH 2048P/R现货
信息内容：E6C2-CWZ5GH 2048P/R 对于TTL的带有对称负信号输出的编码器，信号传输距离可达150米。 旋转编码器由精密器件构成，故当受到较大的冲击时，可能会损坏内部功能，使用上应充分注意。安装 安装时不要给轴施加直接的冲击。 编码器轴与机器的连接ircuits Power supply reverse polarity protection, Load short-circuit protection --- Ambient temperature range Operating: −10 to 70°C (with no icing), Storage: −25 to 85°C (with no icing) Ambient humidity range Operating/Storage: 35% to 85% (with no condensation) Insulation resistance 20 MΩ min. (at 500 VDC) between current-carrying parts and case Dielectric strength 500 VAC, 50/60 Hz for 1 min between current-carrying parts and case Vibration resistance Destruction: 10 to 500 Hz, 150 m/s 2 or 2-mm double ampl
