E6C2-CWZ5GH 2048P/R
对于TTL的带有对称负信号输出的编码器,信号传输距离可达150米。 旋转编码器由精密器件构成,故当受到较大的冲击时,可能会损坏内部功能,使用上应充分注意。安装 安装时不要给轴施加直接的冲击。 编码器轴与机器的连接ircuits Power supply reverse polarity protection, Load short-circuit protection ---
Ambient temperature
range
Operating: −10 to 70°C (with no icing), Storage: −25 to 85°C (with no icing)
Ambient humidity
range
Operating/Storage: 35% to 85% (with no condensation)
Insulation resistance 20 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 500 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance Destruction: 10 to 500 Hz, 150 m/s
2
or 2-mm double ampl
E6C2-CWZ5GH 1800P/R % max. 12 VDC −10% to 24 VDC +15%, ripple (p-p): 5% max. 5 VDC −5% to 12 VDC +10%, ripple (p-p): 5% max. 5 VDC ±5%, ripple (p-p): 5% max. Current consumption*1 80 mA max. 100 mA max. 160 mA max. Resolution (pulses/rotation) 10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400, 500, 600, 720, 800, 1,000, 1,024, 1,200, 1,500, 1,800, 2,000 100, 200, 360, 500, 600, 1,000, 2,000 10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400, 500, 600, 720, 800, 1,000, 1,024, 1,200, 1,500, 1,800, 2,000 Output phases Phases A, B, and Z Phases A, A, B, B, Z, and Z Output configuration NPN open-collector output PNP open-collector output Voltag 测量转速的装置,光电式旋转编码器通过光电转换,可将输出轴的角位移、角速度等机械量转换成相应的电脉冲以数字量输出(REP)。它分为单路输出和双路输出两种。技术参数主要有每转脉冲数(几十个到几千个都有),和供电电压等。单路输出是指旋于金属有一定的厚度,精度就有限制,其热稳定性就要比玻璃的差一个数量级,塑料码盘是经...
E6C2-CWZ5G 2048P/R 90°±45° between A and B (1/4 T ± 1/8 T) Rise and fall times of output 1 μs max. (Control output voltage: 5 V, Load resistance: 1 kΩ, Cable length: 2 m) 1 μs max. (Cable length: 2 m, Sink current: 10 mA) 0.1 μs max. (Cable length: 2 m, IO = −20 mA, IS = 20 mA) Starting torque 10 mN·m max. Moment of inertia 1×10 −6 kg·m2 max.; 3 × 10 −7 kg·m2 max. at 600 P 电压:DC30V以下 负载电流:35mA以下 残留电压:0.4V以下 (负载电流35mA时) V以下 源电流:35mA以下 残留电压:0.4V以下 (源电流35mA时) 输出电阻:2kΩ 输出