供应OMRON欧姆龙编码器E6C2-CWZ5B 300P/R现货
| 价 格： | 1.00 | |
| 型号/规格： | E6C2-CWZ5B 300P/R | |
| 品牌/商标： | OMRON |
E6C2-CWZ5B 300P/R
m max.
工作时：-10～+70°C、保存时：-25～+85°C (无结冰)
环境湿度范围
工作时、保存时：各35～85%RH (无结露)
绝缘电阻
20MΩ以上(DC500V兆)
Moment of inertia 1×10
−6
kg·m2
max.; 3 × 10
−7
kg·m2
max. at 600 P/R max.
Shaft
loading
Radial 50 N
Thrust 30 N
Maximum
permissible speed
6,000 r/min
Protection circuits Power supply reverse polarity protection, Load short-circuit protection ---
Ambient temperature
range
Operating: −10 to 70°C (with no icing), Storage: −25 to 85°C (with no icing)
Ambient humidity
range
Operating/Storage: 35% to 85% (with no condensa
30 VDC max.
Sink current: 35 mA max.
Residual voltage: 0.4 V max.
(at sink current of 35 mA)
Applied voltage: 30 VDC max.
Source current: 35 mA max.
Residual voltag
- 所属城市：广东 深圳
- [联系时请说明来自维库仪器仪表网]
- 联系人： 刘先生/林小姐
- 电话：0755-36956963/82597357
- 传真：0755-27383735
- 手机：18902436749/13590212016/13723727879
- QQ ：
供应OMRON欧姆龙编码器E6C2-CWZ6CH 10P/R现货
信息内容：E6C2-CWZ6CH 10P/R 50 N Thrust 30 N Maximum permissible speed 6,000 r/min Protection circuits Power supply reverse polarity protection, Load short-circuit protection --- Ambient temperature range Operating: −10 to 70°C (with no icing), Storage: −25 to 85°C (with no icing) Ambient humidity range Operating/Storage: 35% to 85% (with +15%, ripple (p-p): 5% max. 12 VDC −10% to 24 VDC +15%, ripple (p-p): 5% max. 5 VDC −5% to 12 VDC +10%, ripple (p-p): 5% max. 5 VDC ±5%, ripple (p-p): 5% max. Current consumption*1 80 mA max. 100 mA max. 160 mA max. Resolution (pulses/rotation) 10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400, 500, 600, 720, 800, 1,000, 1,024, 1,200, 1,500, 1,800, 2,000 100, 200, 360, 500, 600, 1 对于TTL的带有对称负信号输出的编码器，信号传输距离可达150米。 旋转编码器由精密器件构成，故当受到较大的冲击时，可能会损坏内部功能，使用上应充分注意。安装 安装时不要给轴施加直接的冲击。 编码器轴与机器
供应OMRON欧姆龙编码器E6C2-CWZ6C 1500P/R现货
信息内容：E6C2-CWZ6C 1500P/R 结束时间 1μs以下 (控制输出电压：5V负载电 阻1kΩ、导线长度：2m) 1μs以下 (导线长度 的脉冲信号一般连接计数器、PLC、计算机，PLC和计算机连接的模块有低速模块与高速模块之分，开关频率有低有高。 如单相联接，用于的脉冲信号一般连接计数器、sidual voltage: 0.4 V max. (at sink current of 35 mA) Applied voltage: 30 VDC max. Source current: 35 mA max. Residual voltage: 0.4 V max. (at source 应在10m以下。并且由于电线的分布容量，波形的上升、下降时间会较长，有问题时，采用施密特回路等对波形进行整形。 ⑤
