B57237S 220M
Inrush current limiters B57237S0***M0**
ICLs S237
Applications
Switch-mode power supplies
Soft-start motors, e.g. in vacuum cleaners
Features
Useable in series connections
up to 265 V
RMS
Coated thermistor disk
Kinked leads of tinned copper wire
Wide resistance range
Manufacturer's logo, NTC and resistance value
stamped on
UL approval (E69802)
Options
Resistance tolerance <20% and alternative lead
configurations available on request
Delivery mode
Bulk (standard) or with cardboard tape on 500-mm reel
General technical data
Climatic category (IEC 60068-1) 55/170/21
Max. power (at 25 °C) P
1) For details on the capacitance C
test
please refer to "Application notes", chapter 1.6.
max
Dimensional drawing
Dimensions in mm
Approx. weight 2 g
3.1 W
Resistance tolerance ∆R
±20 %
Rated temperature T
R
R
/R
R
25 °C
Dissipation factor (in air) δ
approx. 17 mW/K
Thermal cooling time constant (in air) τ
th
approx. 90 s
Heat capacity C
Electrical specification and ordering codes
R
Ω
25
I
max
(0...25 °C)
A
** = Delivery mode
00 = Bulk
51 = Reel packing
C
test
1)
230 V AC
µF
C
test
1)
110 V AC
µF
c
th
R
min
(@ I
max
approx. 1530 mJ/K
, 25 °C)
Ω
Ordering code
1 9.0 700 2800 0.038 B57237S0109M0**
2.2 7.0 700 2800 0.064 B57237S0229M0**
2.5 6.5 700 2800 0.074 B57237S0259M0**
4.7 5.1 700 2800 0.120 B57237S0479M0**
5 5.0 700 2800 0.125 B57237S0509M0**
7 4.2 700 2800 0.172 B57237S0709M0**
Page 2 of 18Please read Cautions and warnings and
Important notes at the end of this document.
B72220Q 171K101 Q20K175 Leaded varistors B722* EnergetiQ series Construction Square varistor element, leaded Coating: epoxy resin, flame-retardant to UL 94 V-0 Features High-EnergetiQ series Q14/Q20 Maximum load capacity at minimum component height Very high surge current ratings up to 15 kA All types duty cycle @ 6 kV/ 3 kA → 10 pulses, according to IEC 60950-1 Annex Q; IEC 61051-2 All types I nom @ 3 kA (Q14), I nom = 5 kA (Q20) → 15 impulses according to UL 1449, 3 edition surge current generator (8/20 µs), Type 2 listed PSpice models Approvals UL CSA VDE IEC Delivery mode Bulk (standard), taped versions on reel or in Ammo pack upon request. For further details refer chapter "Taping, packaging and lead configuration" for leaded varistors. General technical data Climatic category to IEC 60068-1 40/85/56 Operating temperature to IEC 61051 40 ... + 85 °C Storage temperature 40 ... +125 °C Electric strength to IEC 61051 ≥ 2.5 kV Insulati...
B72220Q 421K101 Q20K420 Leaded varistors B722* EnergetiQ series Construction Square varistor element, leaded Coating: epoxy resin, flame-retardant to UL 94 V-0 Features High-EnergetiQ series Q14/Q20 Maximum load capacity at minimum component height Very high surge current ratings up to 15 kA All types duty cycle @ 6 kV/ 3 kA → 10 pulses, according to IEC 60950-1 Annex Q; IEC 61051-2 All types I nom @ 3 kA (Q14), I nom = 5 kA (Q20) → 15 impulses according to UL 1449, 3 edition surge current generator (8/20 µs), Type 2 listed PSpice models Approvals UL CSA VDE IEC Delivery mode Bulk (standard), taped versions on reel or in Ammo pack upon request. For further details refer chapter "Taping, packaging and lead configuration" for leaded varistors. General technical data Climatic category to IEC 60068-1 40/85/56 Operating temperature to IEC 61051 40 ... + 85 °C Storage temperature 40 ... +125 °C Electric strength to IEC 61051 ≥ 2.5 kV Insulati...