类型 : | 接口芯片 RS-422 四路差动线路驱动器 |
驱动器/接收器数 : | 4/0 |
规程 : | RS422 |
电源电压 : | 4.5 V ~ 5.5 V |
安装类型 : | 表面贴装 |
封装/外壳 : | 16-SOIC(0.200", 5.30mm 宽) |
包装 : | 剪切带 (CT) |
供应TJA1050T CAN总线驱动器IC FEATURES· Fully compatible with the “ISO 11898” standard· High speed (up to 1 Mbaud)· Very low ElectroMagnetic EmissiON (EME)· Differential receiver with wide common-mode range forhigh ElectroMagnetic Immunity (EMI)· An unpowered node does not disturb the bus lines· Transmit Data (TXD) dominant time-out function· Silent mode in which the transmitter is disabled· Bus pins protected against transients in an automotiveenvironment· Input levels compatible with 3.3 V and 5 V devices· Thermally protected· Short-circuit proof to battery and to ground· At least 110 nodes can be connected GENERAL DESCRIPTIONThe TJA1050 is the interface between the Controller AreaNetwork (CAN) protocol controller and the physical bus.The device provides differential transmit capability to thebus and differential receive capability to the CANcontroller.The TJA1050 is the third Philips high-speed CANtransceiver after the PCA82C250 and the PCA82C251.The most importan...
说明 The SN65C1167, SN75C1167, SN65C1168, and SN75C1168 dual drivers and receivers are integrated circuits designed for balanced transmission lines. The devices meet TIA/EIA-422-B and ITU recommendation V.11. The SN65C1167 and SN75C1167 combine dual 3-state differential line drivers and 3-state differential line receivers, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, which can be connected together externally to function as direction control. The SN65C1168 and SN75C1168 drivers have individual active-high enables. 特性 Meet or Exceed Standards TIA/EIA-422-B and ITU Recommendation V.11 BiCMOS Process Technology Low Supply-Current Requirements: 9 mA Max Low Pulse Skew Receiver Input Impedance . . . 17 kdzsc/18/2507/18250723.gif Typ Receiver Input Sensitivity . . . ±200 mV Receiver Common-Mode Input Voltage Range of .7 V to 7 V Operate From Single 5-V Power Supply Gli...