让卖家找上门
发布询价>>
您所在的位置:仪器仪表网> 电子元器件>供应代理远翔FP6188-2A同步降压IC,替代MP1482,RT8284

供应代理远翔FP6188-2A同步降压IC,替代MP1482,RT8284

价 格: 面议
型号/规格:FP6188
品牌/商标:远翔

  • FP6188-2A,340Khz,SOP-8同步降压IC,完全替代MP1482(MPS)及RT8284(Richtek)
  • FP6188-2A,23V,340kHz,同步整流降压IC,与MP1482是PIN-TO-PIN。
  • FP6188特点如下描述:
  • 1、FP6188输出电容可以只使用陶瓷电容,整个电路只需要一个输入电解电容。
  • 2、FP6188待机电流1mA(MP1482:1.3mA典型值),关断电流1uA。
  • 3、FP6188效率比较高:93%,内部导通电阻只有130毫欧。
  • 4、FP6188具有使能端,可以进行关断,同时具有过电流保护。
  • 5、FP6188外围电路相对简单,只需使用10uH的电感,相对体积小。
  • 6、FP6188在低负载时,效率比较高,功耗比较低。优于MP1482。
  • 7、FP6188耐压可以到23V,MP1482耐压只有18V。
  • 8、FP6188和MP1482两个IC反馈电压一样,都是Vfb=0.923V。
  • 9、FP6188和MP1482封装均为SOP
  • [返回]

    深圳市百盛新纪元半导体有限公司
    公司信息未核实
    • 所属城市:广东 深圳
    • [联系时请说明来自维库仪器仪表网]
    • 联系人: 郑先生
    • 电话:0755-82570180
    • 传真:0755-82570180
    • 手机:18948314942
    • QQ :QQ:1094642907QQ:1959596089QQ:573547355
    公司相关产品

    供应PT4211是一款连续电感电流导通模式的降压恒流源

    信息内容:

    PT4211是一款连续电感电流导通模式的降压恒流源,专门针对用于驱动1-3颗串联LED而设计。PT4211可接受的输入电压范围从5伏到30伏,输出电流可调至350mA。 PT4211 内置功率开关,采用高端电流采样方式,通过一个外部电阻设定LED平均电流。专用调光DIM引脚可以接受宽范围的PWM调光信号。当DIM的电压低于0.4伏时,功率开关关断,PT4211进入极低工作电流的待机状态。 PT4211采用SOT23-5封装。 关键特性 极少的外部元器件 输入电压范围从5V到30V 输出350mA电流 专用调光管脚可接受PWM调光 3%的输出电流精度 LED开路自然保护 高达93%的效率 输出可调的恒流控制方法 软过温保护尽大可能减少高温下LED闪烁 SOT23-5封装

    详细内容>>

    供应PT6103 -线性锂电池充电管理芯片

    信息内容:

    The PT6103 is a highly integrated Li-ion battery linear charging management device targeted at space limited portable applications. The PT6103 offers an integrated MOSFET and current sensor, reverse blocking protection, high accuracy current and voltage regulation, charge status indication, and charge termination in SOT23,DFN6,DFN8 or ESOP8 package. The PT6103 charges a battery in three phases: trickle charging, constant current and constant voltage. No blocking diode is required due to the internal MOSFET architecture. The thermal feedback regulates the charging current to limit the chip temperature during high power operation or high ambient temperature to maximize the charge rate without risk of overheating . The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The PT6103 automatically terminates the charge cycle when the charge current drops to 1/10 the programmed value after the final float voltage is reached. Once t...

    详细内容>>

    相关产品