128-bit wide interface/accelerator enables high-speed 60 MHz operation.
u 32 kB to 40 kB of on-chip static RAM and 512 kB of on-chip flash memory.
n USB 2.0 Full-speed compliant device controller with 2 kB of endpoint RAM.
u An additional 8 kB of on-chip RAM accessible to USB by DMA (LPC2158 only).
n 32 segment ´ 4 backplane LCD controller supports from 1 to 4 backplanes.
n Single 10-bit DAC provides variable analog output.
n Low power Real-Time Clock (RTC) with independent power and 32 kHz clock input.
n Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s),
SPI and SSP with buffering and variable data length capabilities.
n High-accuracy internal RC oscillator option allows operation without external oscillator
components. The RC oscillator option is selectable and fine tunable.
n 2.4 V to 3.6 V VDD operating range. I/O pins are 5 V tolerant (may be pulled up or
driven to 5.5 V).
n 100-pin LQFP package with 38 microcontroller I/O pins minimum.
n Individual enable/disable of peripheral functions as well as peripheral clock scaling for
additional power optimization.
The LPC2131/32/34/36/38 microcontrollers are based on a 16/32-bit ARM7TDMI-S CPUwith real-time emulation and embedded trace support, that combine the microcontrollerwith 32 kB, 64 kB, 128 kB, 256 kB and 512 kB of embedded high-speed flash memory. A128-bit wide memory interface and a unique accelerator architecture enable 32-bit codeexecution at maximum clock rate. For critical code size applications, the alternative 16-bitThumb mode reduces code by more than 30 % with minimal performance penalty.Due to their tiny size and low power consumption, these microcontrollers are ideal forapplications where miniaturization is a key requirement, such as access control andpoint-of-sale. With a wide range of serial communications interfaces and on-chip SRAMoptions of 8 kB, 16 kB, and 32 kB, they are very well suited for communication gatewaysand protocol converters, soft modems, voice recognition and low-end imaging, providingboth large buffer size and high processing power. Various 32-bit tim...
16/32-bit ARM7TDMI-S microcontroller in a tiny LQFP64 package.n 16 kB on-chip Static RAM.n 128/256 kB on-chip Flash Program Memory. 128-bit wide interface/acceleratorenables high speed 60 MHz operation.n In-System Programming (ISP) and In-Application Programming (IAP) via on-chipboot-loader software. Flash programming takes 1 ms per 512 byte line. Singlesector or full chip erase takes 400 ms.n EmbeddedICE-RT interface enables breakpoints and watch points. Interruptservice routines can continue to execute whilst the foreground task is debuggedwith the on-chip RealMonitor™ software.n Embedded Trace Macrocell™ enables non-intrusive high speed real-time tracingof instruction execution.n Four channel 10-bit A/D converter with conversion time as low as 2.44 ms.n Two 32-bit timers (with 4 capture and 4 compare channels), PWM unit (6 outputs),Real Time Clock and Watchdog.n Multiple serial interfaces including two UARTs (16C550), Fast I2C (400 kbits/s)and two SPIs™.n 60 MH...