供应NXP LPC2114/2124单片机
| 价 格： | 面议 | |
| 型号/规格： | LPC2114/2124 | |
| 品牌/商标： | NXP | |
| 内存大小： | 8位 |
16/32-bit ARM7TDMI-S microcontroller in a tiny LQFP64 package.
n 16 kB on-chip Static RAM.
n 128/256 kB on-chip Flash Program Memory. 128-bit wide interface/accelerator
enables high speed 60 MHz operation.
n In-System Programming (ISP) and In-Application Programming (IAP) via on-chip
boot-loader software. Flash programming takes 1 ms per 512 byte line. Single
sector or full chip erase takes 400 ms.
n EmbeddedICE-RT interface enables breakpoints and watch points. Interrupt
service routines can continue to execute whilst the foreground task is debugged
with the on-chip RealMonitor™ software.
n Embedded Trace Macrocell™ enables non-intrusive high speed real-time tracing
of instruction execution.
n Four channel 10-bit A/D converter with conversion time as low as 2.44 ms.
n Two 32-bit timers (with 4 capture and 4 compare channels), PWM unit (6 outputs),
Real Time Clock and Watchdog.
n Multiple serial interfaces including two UARTs (16C550), Fast I2C (400 kbits/s)
and two SPIs™.
n 60 MHz maximum CPU clock available from programmable on-chip
Phase-Locked Loop with settling time of 100 ms.
n Vectored Interrupt Controller with configurable priorities and vector addresses.
- 所属城市：浙江 杭州
- [联系时请说明来自维库仪器仪表网]
- 联系人： 吴先生
- 电话：0579-87541482
- 传真：0579-87541492
- 手机：15158904582
- QQ ：
供应NXP LPC2109/2119/2129 单片机
信息内容：The LPC2109/2119/2129 are based on a 16/32-bit ARM7TDMI-S CPU with real-timeemulation and embedded trace support, together with 64/128/256 kB of embeddedhigh-speed flash memory. A 128-bit wide memory interface and a unique acceleratorarchitecture enable 32-bit code execution at maximum clock rate. For critical code sizeapplications, the alternative 16-bit Thumb mode reduces code by more than 30 % withminimal performance penalty.With their compact 64-pin package, low power consumption, various 32-bit timers,4-channel 10-bit ADC, two advanced CAN channels, PWM channels and 46 GPIO lineswith up to nine external interrupt pins these microcontrollers are particularly suitable forautomotive and industrial control applications, as well as medical systems andfault-tolerant maintenance buses. With a wide range of additional serial communicationsinterfaces, they are also suited for communication gateways and protocol converters aswell as many other general-purpose applications.Remark: Import...
供应NXP LPC2101/2102/2103 单片机
信息内容：The LPC2101/02/03 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-S CPU withreal-time emulation that combines the microcontroller with 8 kB, 16 kB or 32 kB ofembedded high-speed flash memory. A 128-bit wide memory interface and a uniqueaccelerator architecture enable 32-bit code execution at the maximum clock rate. Forcritical performance in interrupt service routines and DSP algorithms, this increasesperformance up to 30 % over Thumb mode. For critical code size applications, thealternative 16-bit Thumb mode reduces code by more than 30 % with minimalperformance penalty.Due to their tiny size and low power consumption, the LPC2101/02/03 are ideal forapplications where miniaturization is a key requirement. A blend of serial communicationsinterfaces ranging from multiple UARTs, SPI to SSP and two I2C-buses, combined withon-chip SRAM of 2 kB/4 kB/8 kB, make these devices very well suited for communicationgateways and protocol converters. The superior performance also makes the...
