步入式恒温恒湿成品试验室

步入式恒温恒湿成品试验室◆用途 Application

用途 Application

·组合步入式恒温湿室为业界提供大型零件、半成品、成品的温湿度环境测试。

·如：计算机终端机、汽车零组件。

Combined wald-in constant temperature humidity chamber provides temperature and humidity environmental tests for large parts,semi-finishend products,and finished products,e.g. computer terminals,auto parts.

步入式恒温恒湿成品试验室◆特点介绍：

组合步入式恒温恒湿室为业界提供大型零件、半成品、成品的温湿度换将测试，如：计算机终端机、汽车零组件。恒温恒湿主要由控制面板、配电盘、保温库板、送风机、加热器、加湿器、冷冻机组合而成，主要规格可区分为6种标准室内尺寸及24种不同条件测试规范。

The walk in temperature and humidity chambers are used for test large components,assemblies and finished products in various industries,e.g. monitor and automobiles productions.They are constru-ctedin modules of control panel electrical control system,partition,air circulation and heating/cooling unit.The chambers are specialized in 6 standard sizes and 24 standard conditioning modules.

步入式恒温恒湿成品试验室◆温湿度分布均匀性特性：

·利用多翼式送风机强力送风循环，避免任何死角，使室内温湿分布均匀。

·完整的安全保护装置。

·假如异常状况发生时，控制荧幕上即自动显示故障状态，切断电源开关，并提出故障排除方法。

·The sirocco fan provides greater air flow rate to minimize any dead zone in the chamber to ensure the uniformity of temperature and humidity.

·Well-prepared safety devices

·If the safety devices of chamber activate,Monitor will display the trouble shooting details and sugg-ested solution.

步入式恒温恒湿成品试验室◆选择执行与满足标准（根据用户要求）

·GB10586-89湿热试验箱技术条件           ·GB/T2423.4-1993交变湿热试验方法

·GB10589-89低温试验箱技术条件           ·GJB150.3-86高温试验

·GB10592-89高低温试验箱技术条件         ·GJB150.3-86低温试验

·GBI1158高温试验箱技术条件              ·GJB150.7-86太阳辐射试验

·GB2423.1-1989低温试验方法              ·GJB150.8-86淋雨试验

·GB2423.2-1989高温试验方法              ·GJB159.9-89湿热试验

·GB/T2423.3-1993恒定湿热试验方法        ·GJB150.10-86霉菌试验

步入式恒温恒湿成品试验室◆主要型号及技术参数SPECIFICATLONS