ZT3800XL-A01-B50-C01TSI振动传感器

前置器ZT3800XL-A01-B50-C01TSI 安徽万珑振动传感器

ANHUIWANLONG安徽万珑电气振动传感器VE5-7310-7295-50QBJ-3800CN位移变送器 HZW-6A-A1-B1-C1-D2相对膨胀测量装置QBJ-3800XL-A04-B50-C00-M04-L65-KOO转速传感器70085-1010-214-6096mmDEHAI振动传感器VE3800XL-A01-X50-L100-M01-K转速传感器XS12JK-3PY-M16*1,行程传感器QBJ-TD-10-200mm转速探头QBJ-CS-1 L=100mm振动传感器VS-2-A04-B06-C02 带铠装屏蔽延伸电缆电涡流探头SYSE11-060-01-02，振动测控仪HZD-L安徽万珑电气胀差传感器3800XL-A04-B50-M04-L90mm-C00-K01测震传感器_DP-D24-20-AA_0~20mm/s品牌安徽万珑电气

具有长期工作可靠性好、测量范围宽、灵敏度高、分辨率高、响应速度快、抗干扰力强、不受油污等介质的影响等优点，因此广泛应用于电力、石油、化工、冶金等行业对汽轮机、水轮机、鼓风机、压缩机、齿轮箱、大型冷却泵等大型旋转机械的动态和静态非接触式位移测量。 
列如径向和轴向的轴位移、胀差、轴偏心、轴振动、键相、转速

传感器是一款根据电涡流效应而制成的传感器，具有非接触测量、响应速度快、可靠性好、抗干扰能力强、可在油污、水等恶劣环境下正常工作等优点。它能对大型旋转机械的轴向位移、轴的径向振动、轴芯轨迹、轴转速等参数进行长期的实时监控，可以有效的对设备进行保护以及进行故障分析。本产品主要由探头、延伸电缆、前置器三部分组成，其中探头尺寸以及样式可根据用户需求而定做；延伸电缆有5米系统和9米系统，同时可配不锈钢铠装，以保护电缆；前置器可选择不同的信号输出：-2～-18V、4～20mA、1～5V、1～10V。品牌安徽万珑电气

应用领域传感器可广泛应用于大型旋转机械的轴向位移、轴的径向振动、胀差、偏心、鉴相器、摆度、轴转速的在线监测与故障诊断中。如汽轮机组、水轮机组、压缩机、大型冷却泵、引风机、齿轮箱、磨煤机、鼓风机、水泵、风力发电机组等大型机械

同时在材料鉴定、表面不平整度测量、金属板厚度测量、材料形变测量等应用领域也得到广泛应用。
特点

1.灵敏度高

2.分辨率高

3.测量范围宽

4.动态响应宽

5.可长线传输

6.适应性强，可在油、水、高气压、强干扰环境中工作

7.非接触地测量、监控位移、振动、转速、尺寸、厚度，无机械测量力

The displacement sensor is a non-contact displacement sensor based on the principle of high frequency eddy current effect. The high frequency oscillating current produced in the preposition is flowing into the coil of the probe through a coaxial cable, and the coil will produce a high frequency electromagnetic field. When the measured metal body is near the coil, due to the effect of high frequency electromagnetic field, the induction current is produced on the metal surface, which is not only eddy current. The current produces an alternating magnetic field, which is opposite to the direction of the coil's magnetic field. The two magnetic fields superposition each other to change the impedance of the original coil. So the change of the distance between the probe and the surface of the measured metal body can be measured by the change of the impedance of the probe coil. The prefix output a DC voltage proportional to the distance according to the change of the impedance of the probe coil.

Static amplitude linearity
+ 2%
+ 5%
Dynamic amplitude linearity
+ 10%
Satic zero error
0.5%
Static amplitude stability
0.5%
Dynamic reference sensitivity error
3%
Static amplitude repeatability1%
frequency response
0 ~ 5KHz (0.5dB)
System temperature drift
0.1%
Point gap (mm) + 5% in the range of measurement
One point eight
Three
Nine
Point voltage (V) + 5% in measurement range
-10
-10
-7.08
Material, shape of the subject matter
Metal material, reference material is 45 steel, shaft, plane, shaft measuring plate
The diameter of the shaft is not less than (mm)
Eighty
The diameter of the measuring disc is not less than (mm)
Eighteen
Thirty
Seventy
Power supply voltage (V)
-20~26Vdc
Power consumption (mA)
TwelveTwelve
Fifteen
Output load
10K.
Ambient temperature in calibration
(20 + 5) C
storage
temperature
Proximitor
-35 C ~ +100 C
probe
-40 C ~ +177 C
Cable
-40 C ~ +177 C
Use
temperature
Proximitor
-30 C ~ +70 C
pobe
-40 C ~ +150 C
Cable
-40 C ~ +150 C
System total weight (standard configuration)
500g + 3%
700g + 3%
Total length of system cable is + 10%
5m or 9m
Extended cable length of + 5%
4m, 4.5m, 8m, 8.5m
The length of the probe cable is 5%
1m, 0.5m
Relative humidity (with joint protection, without immersion)
100% condensation
Altitude limit
<2000m
Normal working environment
No strong magnetic field, non corrosive vapour liquid, no strong vibration source
Dangerous working environment (DWQZi Series)
0, 1, 2 dangerous places of explosive gas mixture in class II A~ II C and T2~T5
Shell protection grade
Not less than IP20
Maximum surface temperature of the sensor shell
No more than 135 degrees centigrade.
insulation resistance
> 500M Omega
Insulation strength
> 500V