油位-10-40mm油温0-100℃振动0-20mm/s

振动组合探头油位：-10-40mm 油温0-100℃ 振动：0-20mm/s 安徽万珑电气

安徽万珑电气YG252-4R2-1D0-20mm/s 15米引线一体化振动变送器 HZD-B-X(220V)振动变送器 HZD-B-9A(24V)振动变送器 HZD-B-9A国产振动变送器 HZD-B-9A(220V)振动变送器 XH-VS SDJ-705LLX0-20mm/S一体化振动探头,JK7330A03—90—10,0—20mm,电涡流式,0.5%物料名称:振动变送器 物料规格:0-20mm/s 4-20mA 0.5%振动变送器\二线制一体化振动变送器测量范围0-25mm/s输出电流 4-20mA工作电压DC24V接线方式二线制详见技术规范书三参数组合探头(一体化温度振动油位).振动/速度/加速度传感器;KR939SB3 测量范围:0-100度;应用场合:风机;物料附加信息轴承振动传感器VT9299H-951-422-00 0-25.4mm/s延长电缆330130-045-00-CN振动探头VT9218H-151-X12-1000H位移探头GJ258-880,振动量程:0-20mm/s 输出4-20mA三参数组合探头,吸附式振动探头测试/测量仪器附件;振动探头/EN080/0-20mm/s 测量范围:0-20MM/S安徽万珑电气振动/速度/加速度传感器;型号规格:KR-939SB 振动:0-20mm/s,油位:-10-40mm,油温:0-100℃, ;测量范围:振动:0-20mm/s,油位:-10-40mm,油温:0-100℃,;工作温度:0-100℃;X振动：0-20mm/s 输出：4-20mA Y振动：0-20mm/s 输出：4-20mA Z振动：0-20mm/s 输出：4-20mA 温度：0-100℃ 输出：4-20mA 安装七资：螺纹连接 螺纹长度30mm 螺纹规技：M27*2mm 测量杠长度：200mm 探头引线长度10米SDJ-706Y\30mv/mm/s三参数组合探头油位:-10-40mm 油温:0-100℃ 震动:0-20mm/s防爆电子振动开关HZD-B-3-A1-B2-C1-D1,HZD-B-III-A1-B2-C1-D1一体化轴振动变送器HZD-Z-6A-A2-B1-C2-D1振动探头VS-2X-A04-B06-C02测量方向水平垂直轴向一体化振动传感器量程0-25mm/s振动装置WT0150-A08-B14-C37-D10位移探头P/N ZH30103-A00-B10-C10-D01-E00 SN:1S1807振动/速度/加速度传感器;型号规格:DZ3700-02-04 准确度:<2%;防护/防爆等级:IP65;测量范围:±1mm;工作温度:-30℃-120℃;工作电压:DC24V;输出信号:电压信号;响应时间:1ms;物料附加信息灵敏度20m/s,频率:5-1000Hz,垂直安装,航空插头两线制出线。位置/位移传感器;型号规格：8000C/CGW-HS5709(探头型号:8125-01-A06-B03-C02-D01-E10 电缆型号:8200-A80-D01 前置器:8300-A25-B90);材质:聚苯硫醚(PPS) 准确度:0.8V/mm;核准:/;电源接头类型:/;防护/防爆等级:IP65;外壳材质:1Cr18Ni9Ti;测量电缆细节:/;测量范围:9mm,-7.08V;安装类型/方式:垂直;公称行程:/;工作温度:/;工作电压:24Vdc;输出信号:电压信号;类型:DWQZ;物料附加信息:8000C/CGW-HS5709(探头型号:8125-01-A06-B03-C02-D01-E10 电缆型号:8200-A80-D01 前置器:8300-A25-B90)全套,DWQZ, Φ25振动/速度/加速度传感器;型号规格:PCZ-9200 20mV/mm/s 准确度:20mV/mm/s;防护/防爆等级:IP65;测量范围:0-0.2MM;工作温度:-30℃~120℃;工作电压:24V;输出信号:20mV/mm/s;物料附加信息0~360度,20mV/mm/s(带接头及8米延伸电缆)安徽万珑电气振动：0-20mm/s 输出：4-20mA 温度：0-100℃ 输出：4-20mA 液位：-10-40mm 输出：4-20mA 安装七资：螺纹连接 螺纹长度30mm 螺纹规技：M27*2mm 测量杠长度：200mm 探头引线长度10米振动/速度/加速度传感器;型号规格:SZ-6G,SLDF181安徽万珑电气

冷却塔风机安全监控系统中，一种非总线结构的通用型组合探头。它可以直接与风机安全监控器"配接，实现单台设备监控。也可以与多种通用二次仪表，或计算机数据采集测控系统（DCS、PLC等）连接使用一体化组合探头为不锈钢全封闭防水结构，探头是以外螺纹形式，安装于风机减速箱的螺纹安装孔中，探杆插入减速箱内，从而获取减速箱中润滑油温度、润滑油油位和箱体振动信号，完成变送输

three parameter combination (oil level temperature vibration combination) probe is a general type combined probe that is used in cooling tower fan safety monitoring system. It can be connected with a variety of general two instruments, or computer data acquisition and control system (DCS, PLC, etc.).

This is applied to the fan gear box combined probe for safe operation of monitoring, in its internal integrated measuring temperature, oil level, vibration signal sensing, conversion and transmission circuit of direct output and the security parameters corresponding to the 4 ~ 20mA standard current signal, can be matched with a variety of general-purpose two meter or      computer digital acquisition monitoring system.

The probe temperature measurement with platinum resistance sensor and semiconductor integrated device; level measurement using a capacitive sensing principle; sensor for measuring      vibration, mechanical vibration acceleration signal acquisition, band-pass filter, an integral and true effective value through the amplifier (RMS) converter, the vibration waveform in the effective bandwidth of it effective value conversion; finally, the oil temperature, vibration generated by the 4 ~ 20mA output.

• Temperature measurement characteristics;

Measurement range of lubricating oil temperature：0～100 ℃ ，Compreh

-ensive error of temperature measurement：±1℃

• Oil level measurement characteristics:

Measurement range of lube oil level：0～50㎜（10 mm for the gear box under normal oil level oil limit position）, Maximum error of oil level measurement： <= ±1㎜

Ambient temperature from -40 to 65 C（Extreme temperature resistance from -50 to 150 C）

• Vibration measurement characteristics：

    Range of vibration measurement：0～20 ㎜/s ，The measurement output is proportional to the effective value of the vibration velocity (RMS). Frequency range of vibration measurement: 10～1000HZ, Maximum error of vibration measurement: <=±1㎜/s

• Signal output characteristics;

Active current type output：DC/4～20mA ，Requirements for passive resistive load。Maximum load resistance：< 300 Ohm

• Supply characteristics of power supply：

working voltage：DC/24V±4V，Maximum protection voltage：DC/30V ，Rated current：DC/80mA, Maximum instantaneous working current：120mA，Internal voltage Ambient temperature range：－20～80℃，Ambient humidity range：0～100％（The port is sealed with 704 silicone rubber seals）

• Electrical connections：

 Two four bit terminals：+24V power supply、GND、It 、t-COM、Io、o-COM、Iv、v-COM：It temperature current signal output；Io oil level current signal output；Iv vibration current signal output：The typical connection refer to the schematic diagram of the connection principle of the probe