询价
9METRE SYSTEM--5mm前置器8mmPROXIMITY SENSOR传感器万珑电气
系统广泛应用于电力、石油、化工、冶金等行业和一些科研单位。对汽轮机、水轮机、鼓风机、压缩机、空分机、齿轮箱、大型冷却泵等大型旋转机械轴的径向振动、轴向位移、键相器、轴转速、胀差、偏心、以及转子动力学研究和零件尺寸检验等进行在线测量和保护。振动传感器，探头规格及线性量程: Φ3(0.5～０.８mm)、Φ4(1mm) Φ5(2mm)、Φ8(2mm)、 Φ10(3mm)、Φ11(4mm)、Φ14(4或5mm)、Φ16(6或７mm) Φ18(8mm)、Φ22(10mm) Φ25(12.７mm)、Φ32(12或14或16mm)、Φ36(18或20mm) Φ50(25mm)■-24V供电:-4~20V、-2～-18V输出 ±12~15V供电:0-5V、0~10V、-5～5V -10~+10V输出。+24V供电:4-20mA、 1-5V输出。Φ8mm一体化电涡流位移/振动传感器和Φ11mm一体化电涡流位移传感器，前置器内置，它在大多数机械监测中应用于径向振动、轴向位移和偏心测量，使用、安装方便，有多种螺纹尺寸、规格选择。能静态和动态地非接触、高线性度、高分辨力地测量被测金属导体距探头表面的距离。它是一种非接触的线性化计量工具。电涡流传感器能准确测量被测体（必须是金属导体）与探头端面之间静态和动态的相对位移变化。在高速旋转机械和往复式运动机械的状态分析，振动研究、分析测量中，对非接触的高精度振动、位移信号，能连续准确地采集到转子振动状态的多种参数。如轴的径向振动、振幅以及轴向位置。在所有与机械状态有关的故障征兆中，机械振动测量这是因为它同时含有幅值、相位和频率的信息。机械振动测量占有优势的另一个原因是：它能反应出机械所有的损坏，并易于测量。从转子动力学、轴承学的理论上分析，大型旋转机械的运动状态，主要取决于其核心—转轴，而电涡流传感器，能直接非接触测量转轴的状态，对诸如转子的不平衡、不对中、轴承磨损、轴裂纹及发生摩擦等机械问题的早期判定，可提供关键的信息。电涡流传感器以其长期工作可靠性好、测量范围宽、灵敏度高、分辨率高、响应速度快、抗干扰力强、不受油污等介质的影响、结构简单等优点，在大型旋转机械状态的在线监测与故障诊断中得到广泛应用。传感器规格有:
-24VDC供电-2—-18VDC或-4—-20VDC输出；
+24VDC供电4——20mA输出，1--5VDC输出;
+-15VDC供电0—5VDC,-5—+5VDC，-10—+10VDC输出，系统3mm;5mm;8mm;11mm;16mm;18mm;22mm;25mm;36mm;50mm;60mm等等各种探头、延伸电缆和 前置器组成.
20V/mm~0.32V/mm的输出使系统的线性范围达0.1~65mm,由于具有这样的线性范围,可广泛应用于往复式和旋转式机械的振动、位移测量.较小的面积效应和宽广的频率响应,也可用于转速和键相等测量
Configuration:? Total Length and Mounting Option: 5 Meters System Length, Panel Mount
? Agency Approval Option: Not Required
The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.
Part Number: 330180-51-05
GE / Bently Nevada 3300 XL 8mm Proximity Transducer System
Features Ideal for Compression Systems, Speed Measurements, and Fluid-Film Bearing Machines
Extended Temperature Range Applications
Complete Interchangeability of Units and Cabling
Backwards Compatible with Other Non-3300 XL Series Transducer System ComponentsDescription
The GE / Bently Nevada 3300 XL 8mm Proximity Transducer System consists of one 3300 XL 8mm probe, one 3300 XL extension cable, and one 3300 XL Proximitor Sensor. The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system's primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute's (API) 670 Standard (4th Edition) for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.
Each 3300 XL 8 mm Transducer System component is backward-compatible and interchangeable with other non-XL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space.3300XL Proximitor Sensor Part Number Breakdown (Not included when sold from Artisan unless specified)
330180-AXX-BXXA: Total Length and Mounting Option
1 0: 1.0 metre (3.3 feet) system length, panel mount
1 1: 1.0 metre (3.3 feet) system length, DIN mount
1 2: 1.0 metre (3.3 feet) system length, no mounting hardware
5 0: 5.0 metre (16.4 feet) system length, panel mount
5 1: 5.0 metre (16.4 feet) system length, DIN mount
5 2: 5.0 metre (16.4 feet) system length, no mounting hardware
9 0: 9.0 metres (29.5 feet) system length, panel mount
9 1: 9.0 metres (29.5 feet) system length, DIN mount
9 2: 9.0 metres (29.5 feet) system length, no mounting hardware
B: Agency Approval Option0 0: Not required0 5: Multiple approvals
Product Family: 3300 XL, 3300XL, 3300-XL
Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if
