功率放大器AR 功放20S1G4价格/售后维修功率放大器AR 功放20S1G4价格/售后维修
The Model 20S1G4 is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required. Housed in a stylish contemporary cabinet, the unit is designed for bench use, but can be removed from the cabinet for immediate equipment rack mounting. The 20S1G4, when used with a sweep generator, will provide a minimum of 20 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 20S1G4 is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF amplifier stages are protected from over-temperature by removing the DC voltage to them if an over temperature condition occurs due to cooling blockage or fan failure. There is a dial display on the front panel to indicate the operate status and fault conditions when an over-temperature or power supply fault has occurred. The unit can be returned to operate when the condition has been cleared. The 20S1G4 includes dial control for both l and remote control of the amplifier. All amplifier control functions and status indications are available remotely in GPIB/IEEE- 488 format, RS-232 hardwire and fiber optic, U, and Ethernet. The bus interface connector is ted on the back panel and positive control of l or remote operation is ured by a Local/Remote switch on the front panel of the amplifier.1
