JMA多阀控制器|JMA valve controller

　　多路阀与JMA多阀控制器的比较

　　Multi-way valve compared with JMA many valve controller

　　多路阀系统

　　Multi-way valve system

　　目前，在水的过滤、、除盐等工艺中应用的自动控制装置多采用的全自动控制多路阀，此阀的设计是将自动控制器(相当于人脑)和执行操作的阀门(相当于人手)合为一体，在的条件下虽具有自动、简单的优点，但同时也存在着如下缺点：

　　At present, in the water filtration, softening, desalination technology in the application of automatic control device, such as imported full automatic control of multi-way valve, the design of this valve is automatically performed on the controller (the equivalent of the human brain) and valve (hand), under certain conditions it is automatic, the advantages of simple, but at the same time it still has the following disadvantages:

　　■ 结构复杂，不易拆卸、维修

　　S structure is complex, difficult to remove, maintenance

　　■ 出现问题难被发现，且某个部件出现故障将影响整个系统的正常运行

　　S a problem hard to be found, and some parts failure will affect the normal operation of the whole system

　　■ 厂家的售后服务如不易到位，用户将无法自行维修，情况严重时会造成整个多路阀连同控制器的报废。

　　S manufacturer of after-sales services such as difficult to reach the designated position, the user will not be able to repair, severe cases will cause the abandonment of the multi-way valve, together with the controller.

　　■ 调节性、互换性差

　　S regulatory, poor compatibility

　　JMA多阀控制器系统

　　JMA valve controller system

　　北京洁明公司针对用户需求，在分析了解全自动控制多路阀的优缺点后，于2003年研发、生产出自动JMA多阀控制器。

　　Beijing jie Ming company in view of the user requirements, based on the ysis to understand the advantages and the disadvantages of automatic control multi-way valve, in more than 2003 research and development, producing automatic JMA valve controller.

　　这种控制器先把“脑”“手”的功能分开，“手”的功能采用常规的液动或气动隔膜阀，保持其灵活、简单、稳定的优点，同时，专门设计的控制器又把“脑”的功能大。

　　This kind of controller is firstly to separate the function of the "brain" "hand", the function of "hand" of the conventional hydraulic or pneumatic diaphragm valve, maintain its the advantages of flexible, simple, stable, at the same time, the designed controller and the ability to "brain" big increase.

　　JMA多阀控制器工作原理

　　JMA valve working principle of the controller

　　JMA多阀控制器由信号分配器和程序控制器构成，固定于水控制器外壳内。

　　JMA valve controller made up of signal distributor and program controller, fixed in waterproof controller inside the shell.

　　信号分配器根据程序控制器的设定，驱动小型电机转动(情况 下也可手动旋转)，转至不同位置就有一个或几个孔道打开或关闭。

　　Signal distributor, according to a set program controller to drive the all motor rotation (special circumstances can also be manual rotation), moved to different positions have one or several channel on or off.

　　分配器孔道位置编号与系统运行步骤相对应，被打开或关闭的孔道引导信号压力源驱动隔膜阀动作。

　　Distributor channel position number corresponding with the system operation steps, open or close the channel guide signal pressure source driver diaphragm valve action.

　　驱动隔膜阀的信号压力源为液体或气体，无持续电压，大大减小了由于电器引起的故障与维护工作。

　　Pressure signal source which drives the diaphragm valve for liquid or gas, no continuous voltage, greatly reduced due to electrical fault and maintenance work.

　　各种信号分配器与程序控制器的多种组合设计，可满足各种水处理系统复杂的程序控制要求。

　　Various signal distributor and a variety of combination design of program controller, can satisfy all kinds of water treatment systems, complex process control requirements.

　　JMA多阀控制器功能简介

　　Introduction of JMA valve controller function

　　● 采用纯中文操作界面，参数设定简单明了，操作人员无须掌握复杂的编程语言;

　　Using pure Chinese interface, parameter setting straightforward, operating personnel do not need to master complex programming language;

　　● 控制器设置的工艺参数采用保护，设定好的参数不会被随意改动;

　　Controller Settings parameters using pword protection, ensure set parameters is not optional change;

　　● 具备多种再生气动模式(定时启动、间隔时间启动、流量启动、远程启动)，再生方式可根据具体工艺灵活选择。

　　Low have a variety of renewable pneumatic mode (timing start and interval time start, flow start, remote start), regenerative way flexible choice according to the specific process.

　　情况下，还可以采用就地人工强制启动再生。

　　Under special circumstances, can also adopt mandatory start on artificial regeneration.

　　● 背光液晶显示单元，且控制器面板具备状态显示功能;

　　Backlit LCD display unit, and the controller panel have status display function;

　　● 再生信号及相关程序输出信号为继电器无源接点信号，触点容量为AC220/5A;

　　Low regeneration signals and related program output all pive contact signal for relay, contact capacity of AC220/5 a;

　　● 远程控制信号采用无源接点信号，且信号保持两秒以上;

　　Remote control signal using pive contact signal, and the signal to keep more than two seconds;

　　● 控制器可以定义的参数包括：

　　When all can define the parameters of the controller including:

　　1.计划 2.M程序 3.S程序 4.商务

　　1. The plan 2. 3 M program. 4 S application business

　　● 多台控制器可实现外围逻辑联锁程序功能。

　　When more than one controller can realize the peripheral logic interlock program function.

　　即多台控制器之间可通S1或S3程序作为相邻两台设备的状态反馈，从而实现彼此间的相互联锁，从工艺上避免两台控制器同时启动再生程序;

　　Is more than one controller can p between S1 and S3 program as the state feedback between two sets of equipment, so as to realize interlock each other between each other, avoid two controllers at the same time starts from craft regeneration procedures;

　　● 控制器配备两套液位逻辑控制单元，信号输出均为继电器无源接点输出;

　　Low logic control unit equipped with two sets of liquid level controller, signal output are pive relay contact output;

　　● 商务时间锁。

　　Low business time lock.

　　该控制器具备商务锁功能，具体使用方法，可向原厂技术咨询。

　　The controller have business lock function, specific method of use, can to the original factory technical consultation.

　　● 再生程序步骤1-16步可选，每步骤时长1-9999秒可选

　　Low regeneration program step step 1-16 optional, each step 1-9999 seconds long is optional

　　● 复位运行：程序控制器处在工作状态时，复位运行可分配器转回至工作位置，避免了下次再生过程中程序混乱;

　　Low reset operation: the program controller is in working status, reset operation can be guaranteed return distributor to work position, avoids the next program chaos in the process of regeneration;

　　● 分配器型号可参阅系统应用选型表。

　　Low distributor model can refer to the application selection table.

　　主要技术参数

　　The main technical parameters

　　● 电源：220VAC/50Hz，10W功率

　　Low power: 220 vac / 50 hz, 10 w power

　　● 远传启动信号：短2秒钟的无源接点信号

　　Low remote start signal: the shortest pive contact signal of 2 seconds

　　● 分配器接口尺寸： 1/8〃G螺纹

　　Low distributor interface sizes: 1/8 "G thread

　　● 压力信号源：气体或液体(建议安装100μ过滤器)

　　Low pressure source: gas or liquid (suggest install 100 mu filters)

　　● 控制源压力：0.2-0.8MPa

　　Low pressure source: 0.2-0.8 MPa

　　● 环境工作温度：4-60℃

　　Low working temperature environment: 4-60 ℃

　　● 控制器外壳尺寸：270×170×105mm

　　Low controller shell size: 270 * 170 * 105 mm

　　● 机壳护等级：水溅、尘、腐

　　Low casing protection grade: waterproof splash, dustproof, anti-corrosion