【跃顺厂家直销】调轨螺丝机,TES-1050调轨螺丝机

【调轨机产品型号】TES-1050

【调轨机产品说明】

一机可适用多种规格螺丝1.0--5.0可调（1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0）可使用特殊螺丝，1：1短螺丝，带垫片螺丝都可以通用。

【调轨机产品详细】

1、一机可适用多种规格螺丝 , 1.0--5.0可调（1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0）;

2、 可使用特殊螺丝， 1：1短螺丝，带垫片螺丝都可以通用;
3、轨道调整方便!螺丝机的轨道可以抽出来自由调整！简单易懂，操作方便，无卡螺丝现象 ;

4、螺丝在滚筒内进行运动落斗，凡是未进入轨道的螺丝都被清除到滚筒内进入下个循环。可自由调整工作速度大小， 通过调整震动强度来改变速度，螺丝到达取点位置不会前后抖动而影响工作效率;

5、送料与振动驱动独立控制，可自由设定理想的延时停止时间，当非正常情况产生时，螺丝机会启动故障报警功能,操作起来和其它螺丝机一样简单;

6、当取出螺钉时,对螺钉头部位置,只要把批头放入批头导向处, 顺着导向下滑,然后朝面前把螺钉拉出即可;

7、比起传统螺丝盘来,每个螺钉可以节省1.4秒的时间求生产率可达 4倍;

8、容易操作,即使生手也能马上学会操作方法;

9、不必对正螺钉,只需将螺钉成批投入供料室内即可;

10、广泛适用于各种类型、长度的螺钉;

11、体积小巧，不占空间;

12、自动导向,配合电批或风批,无卡螺丝现象!是代替传统螺丝机的理想产品;

13、计数螺丝机有计数功能，0-9999任意设定，量到报警。

应用：手机、硬盘、键盘、电脑、家电、风扇、电子、塑胶、音箱、电器、玩具、DVD、通讯设备等。

TES  Series

【Name】TES  Series

【Mode】TES-1050

【 Product description】

Applicable to several specifications screw with one equipment,1.0 - 5.0 adjustable (1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0), applicable to special screws, 1:1 short screw、 screw with washer .

【 Features】

1、Applicable to several specifications screw with one equipment,1.0 - 5.0 adjustable (1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0)；

2、Applicable to special screws, 1:1 short screw、 screw with washer;

3、It is easy to adjust track，the track can be pulled out to adjust freely, easy to understand and operate，don’t block screw;

4、Screws move with the roller and fall at the high position, the screws, which did not enter the track, will move into the next cycle. The working speed can be adjusted by adjust the vibration strength ,screw does not shake at the taking point;

5、Feeding and vibration-driven are independent controlled, the residence time can be set freely, the equipment will launch failure alarm at non-normal conditions.Operation is as easy as other screw equipment；

6、When you take the screw, you needn’t paying special attention to the position of the screw head, just put the drill tip into the guide, then slide along, the screw will be pulled out；

7、Compared with traditional screws, this equipment can save 1.4 seconds each time, productivity increased by 4 times；

8、Easy to operate, even novices can quickly learn how to operate；

9、Don’t need aligning the screw, just put screws into the hopper;

10、Widely applied to many screw types with different length and head shape;

11、Compact, less space；

12、Auto-guide, working with the electrical or air screwdriver, won't block screw. It is ideal product to replace the traditional products；

13、This mode has count function , 0-9999 can be set , and launch alarm at the set number.

Application: Cell phones, hard disk, keyboard, computer 、DVD 、Home appliances、 fans 、electronics、plastics、electrical appliances, electronic toys, electrical communication equipment etc…