YI-10/6000气动金刚石链条锯(矿用气动链条锯)，是我公司经过多年的探索，开发出的新型切割与开槽工具。
气动金刚石链条锯由金刚石链条锯头、液压胶管总成、自加压冷却水箱三大部分组成，液压胶管总成将气源和金刚石链条锯连接起来，气源提供的气压驱动金刚石链条锯运转，进行切割。工作时，冷却水通过链板中间的孔流向切割部位，起到冷却和降尘的作用。
气动金刚石链条锯可用于岩石、矿山开采，用于密闭墙的砌筑，也可用于救援时的混凝土与岩石破拆。
气动金刚石链条锯所需要的气源可以是通风管道或空气压缩机（链条锯接受的压力为5-7公斤）。
气动金刚石链条锯(矿用气动链条锯)主要用途
切割岩石、混凝土、钢筋混凝土、管道、砖石、石头和其它石材；
开槽，用于密闭墙的砌筑；
适用场所：密闭墙开槽、拆除、切割等地面场所。
气动金刚石链条锯(矿用气动链条锯)型号的组成及其代表意义
10/6000 链条锯机重（kg）/主轴额定转速（r/min）
L 链条锯机重（kg）/主轴额定转速（r/min）
JQ 特征：L－金刚石链条
产品类别代号：气动锯
金刚石链条锯锯头
主要有主机、链板、金刚石锯条、行走导板、开关、冷却水管接口、空气管接口等组成。
1—液压胶管总成2—冷去水管接口3—主机4—行走导板5—链板6—开关 7—金刚石锯条锯
气动金刚石链条锯(矿用气动链条锯)技术参数
*额定主轴转速：≥6000 r/min
*机重（液压胶管总成）：≤10 kg
*动力源：压缩空气
*切割性能S 切割截面积为200mm×100mm,长度为500mm、强度等级为0的混凝土砖，切断时间不应大于40s
*锯板长度cm ≥43
*可切割深度cm ≥40
额定压力：≤0.7 MPa
额定流量：≤1000 L/min
冲洗水压力：0.2-0.56 MPa
噪声：≤120 dB(A)
适用岩石硬度：≤8 F
连接气管长度：200米
设备配置
金刚石锯头1套
锯板1片
气管20米
自加压冷却水箱
切割岩石金刚石锯条2条
切割松散材质金刚石锯条2条
设备箱1套
安标证号：MAJ110271
气动金刚石链条锯(矿用气动链条锯)产品特点
气动型金刚石链条锯，气源容易获取；
切割速度快，转速6000r/min；
相对于液压链条锯，可远距离操作，200米，液压链条锯连接的液压不能过20米；
因为是低压驱动（气源压力小于7公斤），所以相对于液压链条锯，不存在漏油等问题；
重量轻便，单人即可操作。
常见问题
Q:目前已经有液压金刚石链条锯，为何还推出气动金刚石链条锯？
A: 液压金刚石链条锯存在笨重，长距离操作、若不能解决密封的问题，还有时漏油，但气动金刚石链条锯就不存在这些问题，它10公斤的重量，单人就可操作，距离气源可200米。
Q:气动金刚石链条锯的动力是什么？井下如何解决？
A:：压缩空气。1、通风管道提供压缩空气2、若就近没有通风管道，配备空气压缩机也可以。
Applications:
Cut with ease, speed and portability through Reinforced Concrete, Brick, Block, Concrete Pipe and Natural Stone. The powerful JQL-10/6000 pneumatic chain saw is designed to cut through walls, floors and columns in a single p.
The unique versatility of a concrete cutting chain saw includes the ability to cut all mechanical openings, deep plunge cuts (up to 40cm deep), corners and an endless variety of irregular shapes that are simply not possible with circular saws.
While other folks are cutting with ordinary saws, you can be cutting faster, cheaper and more reliably with the JQL-10/6000 pneumatic chain saw.
Key features:
l High torque output for tough cutting jobs
l Specifically designed for the demanding requirements of professional sawing and drilling contractors
l Safety operating trigger prevents accidental starting
l Now with Diamond chain – optimized for use with pneumatic saws
l Deep plunge cuts – up to 40cm deep
l square corners up to 200mm×100mm with no overcuts
l Operation from a distance up to 200m
l Cut mechanical openings and irregular shapes
l Durable industrial finish on die-cast aluminum body stands up to harsh environments
l Built-in Wallwalker provides leverage advantage to make cutting easier
l Modular design for easy service
l Reliable and easy to maintain – No belts, carburetors or fuel lines to maintain
l Stretch Reduction System (SRS) maximizes chain life and reduces need for adjustments
l No gas or engine fumes to deal with
l Low cost of operation – Pays for itself every time you use it with faster cutting and completion of most jobs in a fraction of the time other saws would take
Technical specification:
Rated speed of spindle
≥6000 r/min
rated pressure
≤0.7 Mpa
rated flow
≤1000 L/min
Power
air bottle , air motor or other compressed air
Max. bar length
430mm
Max. cutting Depth
400mm
Noise level
≤120 dB(A)
Water pressure
0.2-0.56 Mpa
Explosion protection
Exibd I
Weight
10kg. (without bar and chain)
Accessories:
diamond chain saw,1unit
saw guide bar,1piece
air hose,20m
water tank,1
diamond chain,2 for hard rock
diamond chain, 2 for incompact object
Carrying case,1
