Item |
| FBR53 | |
Contact Data | Configuration | Form U | |
Material | Silver-tin oxide (AgSnO ) 2 | ||
Voltage drop | Max. 100 mV at 1A (12VDC open contact voltage) Average 1.5mΩ at 7A, 12VDC | ||
Contact rating | 14VDC, 25A (resistive load) | ||
Max. carrying current | 30A continuous (15A each contact) at 25 °C | ||
Max. inrush current | 60A (30A each contact) at 25 °C | ||
Min. switching load * | 6 VDC, 1A | ||
Life | Mechanical | Min.10 x 106operations (with no load for contact) | |
Electrical | Min.100 x 103operations, 14VDC, 20A (resistive load) | ||
Coil Data | Rated power | 600 mW | |
Operate power | 220 mW | ||
Operating temperature range | -40 °C to +125 °C (no frost) | ||
Storage temperature range | -40 °C to +125 °C (no frost) | ||
Operating humidity | 45 to 85% RH | ||
Coil wire temp. cl | F | ||
Timing Data | Operate (at nominal voltage) | Max. 10 ms | |
Release (at nominal voltage) | Max. 5 ms (no diode) | ||
Insulation | Resistance (initial) | Minimum 100 M Ω | |
Dielectric strength | Open contacts | 500 VAC (50/60 Hz) 1min. | |
Contacts to coil | 500 VAC (50/60 Hz) 1min. | ||
Other |
Vibration resistance | Misoperation | 10 to 55Hz double amplitude 1.5mm, direction X, Y, Z |
Endurance | 10 to 100Hz double amplitude 1.5mm, direction X, Y, Z No damage (mechanical and electrical) after test. Coil energizing: 1 hr each direction, Coil not energized: 1 hr each direction | ||
Shock | Misoperation | 100m/s² (11ms), direction X, Y, Z | |
Endurance | 1,000m/s ² (11ms), direction X, Y, Z, each 6 shocks. No damage (mechanical and electrical) after test. Coil energizing: 3 shocks. Coil not energized: 3 shocks, total 36 shocks. | ||
Terminal | Solderability | At 270 &plun; 10 °C for 3 &plun; 0.5sec. | |
Strength | 9.8N (1 Kgf) Pull force in lonudinal direction for 10 sec. | ||
Weight | Approximately 6 g | ||
Sealing | Sealed, cat III | ||
北京忠乐电子科技有限公司
免企业未认证证营业执照未上传
扫一扫
进入手机店铺
