* CRS07采用测量范围为&plun; 100 ° / s和一个电缆/连接器。
*一个轴模拟(比例)输出陀螺经营单5Vdc电源电压。
*体积小,低质量。
*金属塑料外壳提供了程度的电气检查和D保护。该基地的住房有两个螺钉,便于安装在客户的平台。
*的偏见重复性。
*合RoHS标准
=======================================================
The following data appli to the packaged variants of the CRS07.
| CRS07 | CRS07-02S |
| Rate Range | &plun;100°/s |
| Output | Analogue Voltage (ratiometric) |
| Scale Factor | |
| Nominal | 20mV/º/s |
| Variation over temperature range | &plun;5% |
| Non-linearity | < &plun;0.5% of full scale |
Bias | |
| Setting tolerance | &plun;3°/s |
| Variation over temperature | &plun;3°/s |
| Ratiometric error | < &plun;1°/s |
| Drift vs time | < &plun;0.55°/s in any 30s period (after start-up time) |
| g sensitivity | < &plun;0.1°/s/g on any axis |
| Bandwidth | > 10 Hz (-3dB) |
| Quicent noise | < 1mV rms |
Environment | |
| Temperature | -40°C to +85°C |
| Linear acceleration | < 100g |
| Shock | 200g (1ms, ½ sine) |
| Vibration | 2g rms (20Hz to 2kHz, random) |
| Cross-axis sensitivity | < 5% |
| M | < 10 gram |
Electrical | |
| Supply voltage | +4.75 to +5.25V |
| Supply current | <35mA (steady state) |
| Noise and ripple | < 15mV rms (DC to 100Hz) |
| Start-up time | < 0.2s |
| RoHS compliance | Y (R & S suffix) |







