1、 注意保存，保存条件不好时，会降低膜片与反射壳（导光板）的粘附力。推荐保存条件为：温度25℃&plun;10℃ 温度65℃&plun;20℃
Store with care. Storing the units in bad conditions will cause the reflector sheet and decrease it’s Adhesive power. Storage the products under the Conditjon:temperature (25℃&plun;10℃) and humidity(65℃&plun;20℃ORH) our recommendation.
2、 焊接温度260℃&plun;5℃，焊接时间小于3秒，烙铁功率小于30W。
The Soldering tempwrature is260℃&plun;5℃and Soldering Time should be less than 3 sec, and soldering iron power should be less than 30W.
3、 焊接点应离产品实体大于1.6mm.
The soldering point should be farther than 1.6mm form body.
4、注意静电，戴有绳腕带，工作台上要有静电垫，设备、仪器要接地，电烙铁、锡炉、波峰焊要接地。