1.1适用范围(Application Range)
此ECH-90W-01是一款宽电压多点输出选择的多功能的电源适配器。
2.产品特点
本适配器的外观设计新颖、选用优质集成控制电路；制作工艺科学严谨精细、产品百满负荷老化，性能稳定。The Adapter of the machine is novel, quality Integrated circuits control; the production procs was precisens.；100% full load aging，reliable and stable。
3、环境条件(Environment conditions)
本适配器于室内充电(this Adapter pecially use for indoor)
4、电气特性(Electric characteristics)
4.1 交、直流输入特性(AC/DC Input characteristics)
4.1.1 AC Input：AC100V—240V，Frequency 50/60Hz;
4.1.2 MAX. Inputcurrent: 2500mA
4.2输出特性Output characteristics
4.3*转接头附表（两种类别选择其一）
序号 | 直头型 | 弯头型 | |||
规格尺寸：mm | 输出端口定义 | 规格尺寸：mm | 输出端口定义 | ||
1 | 6.0*1.4*4.4 | 针式母头 | 6.0*1.4*4.4 | 针式母头 | |
2 | 6.3*3.0 | DC | 6.3*3.0 | DC | |
3 | 5.5*2.5 | 音叉 | 5.5*2.5 | DC | |
4 | 5.5*2,1 | DC | 5.5*2.1 | DC | |
5 | 5.5*1.7 | 音叉 | 5.5*1.7 | 音叉 | |
6 | 5.0*1.0*3.0 | 针式母头 | 4.8*1.7 | 音叉 | |
7 | 4.8*1.7 | 音叉 | 4.0*1.7 | 音叉 | |
8 | 4.0*1.7 | 音叉 | 3.5*1.35 | DC | |
4.3.1在输出两端发生短路时，并不会发生火灾和任何的危险。当短路被除去后，适配器自动地恢复正常使用。When short circuit occurs at the two output ends, there will be no fire or any danger.
When the short circuit is removed, the adapter is rtored to be in normal operation.
5.1 *高温测试High temperature tting
实验温度为65℃&plun;2℃，产品不包装，持续时间为5小时。在常温下放置待恢复后对其外观、缘强度、指示功能及电性能进行重新测试。外观应平整无划痕、毛刺以及其它机械损伤，外露金属部分电镀层不脱落无锈蚀；无击穿、飞弧现象；指示功能及电性能正常
Experimental temperature is 65℃&plun;2℃, without package, duration is 5 hours.
Put it in the normal temperature .After recovering, we will tt it again to the appearance, insulation strength, indication function and electrical property.
The appearance should ooth, without scratch, burr and other mechanical damage. At the same time , the plating layer of exposed metallic part will not fall off and no rust ; without the phenomenon of breakdown and electric arcing; it is normal for the indication function and electrical property.
5.2*低温测试*Low temperature tting
因条件的限制此功能暂未测试。As limited of the condition, this function is not tted temporarily.
5.3 *恒定湿热测试Constant humid&heat tting
实验温度为40℃&plun;2℃，湿度为90%～95%，产品不包装，持续时间为48小时。测试后对其外观、缘强度、指示功能及电性能进行重新测试。外观应平整无划痕、毛刺以及其它机械损伤，外露金属部分的电镀层不脱落无锈蚀；无击穿、飞弧现象；指示功能及电性能正常。
Experimental temperature is 40℃&plun;2℃, the humidity is 90%～95%, without package, duration is 48 hours. After tting, we will tt it again to the appearance, insulation strength, indication function and electrical property.
The appearance should ooth, without scratch, burr and other mechanical damage. At the same time , the plating layer of exposed metallic part will not fall off and no rust ; without the phenomenon of breakdown and electric arcing; it is normal for the indication function and electrical property.
5.4*振动测试(Vibration tting)
频率为10～55Hz，振幅为0.35mm，每个方向上扫频循环次数为10次。实验后对其外观、缘强度、指示功能及电性能进行重新测试。外观应无机械性损伤，外露金属部分的电镀层不脱落无锈蚀，
指示功能及电性能正常。
Frequency is 10～55Hz,Amplitude is 0.35mm, each direction upward cycle for 10 tim. After experiments, re-tt its appearance, insulation intensity, indication functions and electricity performance. When appearance has not mechanical damage, the exposed metal parts’ plating layer no fall off and no rust corrosion, it shows normal for indirection function and electricity performance.
5.5跌落测试Falling tting
高度为1000mm，实验台厚度为20mm的硬木板，6个表面，每个方向1次。实验后对其外观、缘强度、指示功能及电性能进行重新测试。外观应无机械性损伤，外露金属部分的电镀层不脱落无锈蚀，指示功能及电性能正常。
the height is 1000mm, experiment Dk is hard board of 20mm, 6 surface, one time for each direction, after experiment, re-tt its appearance, insulation intensity, indication functions and electricity performance. When appearance has not mechanical damage, the exposed metal parts’ plating layer has not fall off and no rust corrosion it shows normal for indirection function and electricity performance.
6.1尺寸（主体）Measure: (main body)
120.5mm&tim;49.5mm&tim;31.5mm
6.2重量(weight) G
6.3 AC输入端为8字座：可以与任意规格的一端是8字的电源线相匹配使用。
6.4外观(appearance)
本产品外壳表面无划伤、批峰、污渍、裂缝，五金无生锈、批峰、划伤。(Our products’ shell surface no scratch, fluous moulding shell ,bmirch, creve, the metals foil have no rust, fluous metal foils, scratch.)
7、包装/贮存PACKAGE & STOCK
7.1包装Package
包装方式：纸盒The way of package: Box
7.2贮存Stock
适配器应贮存在环境温度为-10℃～50℃，清洁、干燥通风的室内，应避免与腐蚀性特质接触，应远离火源及热源。The adapter should be stocked under the temperature -10℃～50℃, in the room of cleanns, dry & airins, don’t touch with the causticy goods , get away from fire and high temperature.
8、注意事项Notice
8.1本适配器于室内充电，请勿将其暴露于雨中或雪中。Don’t expose the adapter in rain or snow. It is only used in room.
8.2请勿分解或组装适配器。Don’t disemble or emble the adapter by yourself!
8.3请勿使适配器落地或将重物置于其上。Don’t drop the adapter or put the heavy thing onto it.
8.4须在0℃～40℃温度范围内使用本适配器。Using this adapter under temperature 0℃～40℃
8.5请勿在直射阳光下、发热的设备旁或其它高温场所使用或储存本适配器。Don’t using or stock this adapter under the direct sunshine, on the side of the hot equipment, or other hot plac
8.6在充电过程中，请勿用如毛巾、衣服之类的物品将适配器掩盖，避免导致火警。Don’t put the adapter under the towel, clothing, etc, avoiding the fire.
9．产品外形图：Charger featur.(产品外型以实物为准)
