1 FEATUR
(1) Display format : 240 &tim; 64 dot-matrix ; 1/ 64 duty.
(2) Construion : LCD, Bezel, Zebra, Yellow-Green LED back-light and PCB.
(3) Display te: STN , Transfleive, 6 o’clock view.
(4) Controller T6963C + 8K SRAM.
(5) Built-in temperature compensation circuit.
(6) +5V for logic power input, Built-in DC/DC converter for LCD driving.
(7) Extend temperature te.
(8) ROHS compliant.
2 MECHANICAL DATA
Parameter Stand Value Unit
Dot size 0.49(W) &tim; 0.49(H) mm
Dot pitch 0.53(W) &tim; 0.53(H) mm
Viewing area 132.0(W) &tim; 39.0(H) mm
Module size
(Edge-te LED )
180.0(W) &tim; 65.0(H) &tim; 16.0 max (T) mm
3 ABSOLUTE MAXIMUM RATINGS
Parameter Symbol Min Max Unit
Logic Circuit Supply Voltage VDD-VSS -0.3 7.0 V
LCD Driving Voltage VDD-VO -0.3 16.0 V
Input Voltage VI -0.3 VDD+0.3 V
Normal temp. te Operating Temp. TOP -20 70 °C
Storage Temp. TSTG -30 80 °C
6 PIN CONNEIONS
Pin No. Symbol Funion
1 FGND Frame Ground
2 VSS Dial Ground (0V)
3 VDD Power Logic Supply Voltage(+5V)
4 VO LCD Power Supply
5 /WR Write data when WR = L
6 /RD Read data when RD = L
7 /CE Chip Enable
8 C/D WR = L --- C/D = H : Command Write C/D = L : Data Write
RD = L --- C/D = H : Status Read C/D = L : Data Read
9 NC (RV) No conneion (Reverse Data In for special requt, change
Negative LCD into Positive display)
10 /RET H --- Normal L --- Initialize T6963C
11 DB0 Data Bus Line
12 DB1 Data Bus Line
13 DB2 Data Bus Line
14 DB3 Data Bus Line
15 DB4 Data Bus Line
16 DB5 Data Bus Line
17 DB6 Data Bus Line
18 DB7 Data Bus Line
19 FS Pin for seleion of font H --- Font 6x8 L --- Font 8x8
20 VEE Negative Output Voltage (-10V)
