应用于金银饰品的补孔、点焊砂眼、修补缝纹及镶嵌部件爪脚部位等焊接。也可用于假牙补砂眼及微小精密件如电池镍带、集成电路引线、钟表游丝、显象管、电子组装等领域的焊接。焊接过程热影响区小；焊斑大小可随意调整；焊点精细、平整、美观，无需过多的焊后处理；可定位；焊接速度快、质量高、焊点无污染、。可适用金、银、铂金、不锈钢、钛等多种金属及其合金。
二，产品亮点：
1，一键操作：一键开关，简化设备启动过程，方便操作者繁琐的使用过程。
2，单片机控制调节：可存储50组常用焊接参数，方便再次使用。
3，体积小巧重量轻：减小工作空间，便于运输和搬移。
三，产品细节：
主要配置 | 泵浦源、激光脉冲电源、显微镜、控制系统 |
外部供电 | 220V/50Hz/25A/1P |
整机电功率 | ≤4.5KW |
激光输出功率 | ≤60W |
激光波长 | 1064nm |
激光频率 | 1-50Hz |
激光脉宽 | 1-5ms |
激光斑点直径 | 0.1-2mm |
观察倍率 | 10倍 |
加工距离 | 90mm |
主机外型尺寸 | 840mm(L)X450mm(W)X500mm(H) |
整机净重量 | 40Kg |
使用环境 | 洁净，无震源，13℃-28℃，湿度5%-75% |
耗材 | 水、电、灯泵 |
Applications：
Common usage in DKLW-60W include: ring sizing, retipping prongs, repairing bezel setting, embling necklace, bracelets, eye gl frames, stainless steel jewellery, filling porosity, repairing worn up mould insert, dental laboratory etc…
DKLW-60Wis such an incredible tool that gives you an excellent result on welding and patching work that our customers have been full of praises for it risk free repair.
The amazing and easy-to-use tool instantly produces a burst of hot light energy with pinpoint accuracy. The sharply focused light beam melts only a very all area of metal and thus transfer all amount of heat to the other parts of the object. It minimizes the potential hazard of heat damage. You no longer need to disemble the piece, unset the stone, perform the repair, and then reset the stone. The DKLW-60W lets you quickly weld the piece with hot light while holding it in your hand. This bench model designed with single laser lamps, the all dimension, light weight will save more working area and much easy for shipping, the imported main parts of the machine provides long life usage and low maintenance.
Technical Specification：
Maximum Peak Power :≦4.5 KW
Average Pulse Energy :≦60W
Laser Safety Cl : Cl 4
Wave Length : 1064 nm
Pulse Length : 1-5 ms
Pulse Frequency : 1-5 Hz
Spot diameter : 0.1mm – 2.0mm
Working distance : 90mm
Program memory : 50 programs
Flash lamp : Single
Laser Cooling System : internal Water Chiller
Power Supply : 220V (+/-10%) 50HZ / 25Amp / 1 phase
Dimension (Main) : 840mm(L)X 450mm(W)X 500mm (H)
Net Weight (Main) : 40Kg
Working requirement : Clean, no dust and vibrate, Temp. :13℃-28℃, Humidity: 5%-75%
