您好,欢迎来到维库仪器仪表网 网站登录 | 免费注册 | 忘记密码

咨询电话SERVICE LINE

86 0514 87982060

商铺首页 公司介绍 公司动态 产品中心 技术资料 在线留言 联系我们
l供应发电机组蓄电池充电器继电器 Battery charger relay
l供应发电机组蓄电池充电器继电器 Battery charger relay
  • l供应发电机组蓄电池充电器继电器 Battery charger relay
  • l供应发电机组蓄电池充电器继电器 Battery charger relay
  • l供应发电机组蓄电池充电器继电器 Battery charger relay
扫一扫

扫一扫
进入手机店铺

l供应发电机组蓄电池充电器继电器 Battery charger relay

产品价格:
电议
产品型号:
供应商等级:
企业未认证
经营模式:
贸易商
企业名称:
龚国雨
所属地区:
江苏扬州市
发布时间:
2014/5/7 2:45:00

86 0514 87982060      

龚国雨(联系我时,请说明是在维库仪器仪表网看到的,谢谢)

企业档案

龚国雨

企业未认证营业执照未上传

经营模式:贸易商

所在地:江苏 扬州市

主营产品:太阳能工程控制柜;太阳能仪表;温度控制器;液位控制器;变频恒压供水控制柜;4-20MA变送器;电子秤;单片机销售;电路设计开发;单片机软件设计开发;plc;电量计量插座

产品搜索

手机访问

扫一扫
进入手机店铺

undefined
undefined

undefined

undefined

KB90型自动化机组充电器

一、产品概述

该产品采用国外技术,选用主件,具有过载记忆保护、短路记忆保护、逆向保护功能。电压适应范围宽、功耗低,重量轻,安装方便,连续使用寿命长等特点,适用于自动化发电机组连续长期补充电,以及一般电瓶长时间补充电,该充电器适应性广,性能,具有结构简单,安装方便,,等显著优点。因而在自动化配电行业有着广泛的应用。

二、技术参数

1.电源电压: AC165~265V 50Hz

2.空载功耗: 3VA

3.输出电压: DC10~14V;DC22~28V(可调)

4.输出电流: DC3.5A;D.5A

5.短路: 15秒

6.过载: 60~180秒

7.自重量:   0.45Kg

三、外形尺寸

长&tim;宽&tim;高: 140mm&tim;100mm&tim;45mm

四、安装、接线方式

该充电器一般安装在控制屏内。有底面安装和平面安装两种可供选择,接线见图。

 

五、调试方法

检查安装接线正确,接通电源,调整电压电位器VR1,当电瓶低于24V时,使充电电流控制在2A左右,当电瓶电压在28V时,充电器充电电流会降到20mA左右,实现浮充电,延长电瓶使用寿命。

扬州康宝电子科技有限公司

 

A, product overview

 

It adopts the most advanced foreign technology and US imported main parts, memory with memory overload protection, short circuit protection, reverse protection function. Voltage to adapt to a wide range, low power consumption, light weight, easy installation, for long life and other characteristics, suitable for automatic generating set for long term supply electricity, and general battery long time supply electricity, the battery charger, wide adaptability, ior performance, reliable and has simple structure, convenient installation, safe and reliable, higher cost performance advantag. Which has been widely used in the automation of power distribution industry.

 

Second, the technical parameters

 

1. The power supply voltage: AC165-265 v, 50 hz

 

2. The no-load power consumption: 3 va

 

3. The output voltage: DC10 ~ 14 v. DC22 ~ 28 v (adjustable)

 

4. Output current: DC3.5 A; D.5 A

 

5. Short circuit delay: 15 seconds

 

6. Overload delay: 60 to 180 seconds

 

7. Since the weight: 0.45 Kg

 

Three, shape size

 

Length x width x height: 140 mm x 100 mm x 45 mm

 

4, installation, connection mode

 

The charger is generally installed in the control panel. Has installed base and plane two kinds to choose from, wiring as shown in figure.

 

 

 

Five, the debugging method

 

Check installation wiring correctly, switch on the power, voltage adjustment potentiometer VR1, when the battery is lower than 24 v, the charging current control is controlled in 2 a, when the battery voltage in 28 v, the charger will charging current to around 20 ma, realize the float charging, prolong the service life of the battery.

 

Yangzhou Campbell electronic technology co., LTD

联系方式

龚国雨

联系人:
龚国雨
所在地:
江苏 扬州市
类型:
贸易商
地址:
中国 江苏 扬州市 江苏省扬州市开发西路长河新苑7-301

服务热线

86 0514 87982060

提示:您在维库仪器仪表网上采购商品属于商业贸易行为。以上所展示的信息由卖家自行提供,内容的真实性、准确性和合法性由发布卖家负责,请意识到互联网交易中的风险是客观存在的。 请广大采购商认准带有维库仪器仪表网认证的(金牌会员、VIP会员、至尊VIP会员、百维通)供应商进行采购!
个人中心
商家电话

人工服务电话
86 0514 87982060

顶部
立即询价
手机访问

扫一扫
进入手机店铺