将该检测器汽车点烟器口,用于测量汽车电瓶工作状况，当打开汽车钥匙未启动发动机时,该检测器显示值正常在12V左右;当启动后汽车电瓶开始充电,该检测器显示值应为13V～15V之间，此时可或行驶。
This battery meter is designed to measure the battery condition by plugging it in cigarette lighting socket. Before igniting the engine, the meter shows 12 v on the screen. As the engine is ignited, 13 v ~ 15 v should appear on the screen, indicating it is in normal operating condition.
当汽车发动不着时，该检测器显示值低于10V,则表示dianping电量严重不足，此时应及时充电或更换电瓶，车辆启动后将自动给电瓶充电，约一个小时后，即可正常使用电瓶启动车辆。
If an engine fails to ignite, the meter will display 10 v or less on screen. It is then necessary to recharge, or replace the battery. After the engine runs about one hour charging the battery, it is back to operating condition.
说明:
该电瓶电压检测器适用于12-24V汽车点烟器插口。
该产品内置0.5A熔断管。若无显示时，请拧开检测器头部，检查玻璃熔断管是否熔断，若熔断，请更换相同规格的熔断管。
Note:
l The battery meter is applicable for 12 v ~24 v car cigarette socket.
l The meter is 0.5 A fused. If there is no display, unscrew the meter connector to check the fuse. Replace the fuse when necessary.
北京环球实业股份有限公司
免企业未认证证营业执照未上传
扫一扫
进入手机店铺
