1. RATING額定值: | DC30V0.5A | |||
2. OPERATIONTEMPERATURERANGE使用溫度範圍： | -40~+70℃ | |||
3.PRERVATIVETEMPERATURERANGE：保存溫度範圍： | -40~+85℃ | |||
4. CONSTRUION DIMENSION結構尺寸： | Apply to the appended drawing： 合附加圖紙 | |||
ITEM项目 | TT CONDITION測試條件 | SPECIFICATION規格 | ||
5. ELERONICAL CHARAERISTICS.電氣性能. | ||||
5A | CONTA RISTANCE 接觸阻 | Being measured at 1KHz all current conta ristance meter. 在1KHZ小電流下測量. | 100mΩ max 100毫歐以下. | |
5B | INSULATION RISTANCE 絕緣阻 | Measurements shall be made following application of DC1000V potential across terminals and across terminals and frame for 1 minute. 在端子之間和端子與殼之間加DC1000V條件下,持續1分鐘測量. | 1000MΩ min 1000兆歐以上. | |
5C | WITHSTAND VOLTAGE 耐電壓 | AC500V (50Hz or 60Hz) shall be applied across terminals and across terminals and frame for one minute 在端子之間和端子與殼之間加AC500V(50HZ或60HZ)條件下,持續1分鐘測量. | There shall be no breakdown. 無擊穿現象出現.
| |
6. MECHANICAL CHARAERISTICS.機械性能. | ||||
6A
| AIONPOWER 动作力 |
| Aion Power 5-15N 动作力 5-15N | |
6B | TERMINAL STRENGTH 端子強度 | A static force of 500gf being applied in one direion on the tip of terminal for 1 minute. 一個500克之靜負荷施加於端子頂部的一個方向持續1分鐘。 | There shall be no sign of damage mechanically and elerically. 無任何迹象顯示機械及電氣性能之損壞. | |
7. DURABILITY.耐久性. | ||||
7A
| SOLDERING TT. 可焊性試驗 | The tip of the terminals shall be dipped 2mm in the solder bath at a temperature of 230&plun;5℃for2&plun;0.5sec.端子頂部被浸入焊錫池2mm深,溫度230&plun;5℃時間2&plun;0.5秒。 | A new uniform coating of solder shall cover a minimum of90of the surface being immersed.浸入的部分90%以上表面將被錫覆蓋. | |
7B | RISTANCE TO SOLDERING HEAT 耐焊接熱 | Soldering area:t/2 of P.C.B thickns焊接面積：印刷基板的1/2厚度處 temperature:260&plun;5℃Sinkingtime: 5&plun;1S.焊接溫度：260&plun;5℃，焊接時間：5&plun;1秒。 | No damage (elerical and mechanical) 無異常。（電氣、機械特性） | |
