无转子硫化仪
编号：GD
规格：GC7028
一. GC7028无转子硫化仪主要技术指标
1．高传感器：0~20N.m。解析度：0.001N.m。
2．控制系统：采用计算机控制和接口板进行数据的采集、保存、处理和打印试验结
果及曲线处理。
3．旋转系统：采用步进Electronics调速电机＋振幅调整器。 摆动角度：±0.5o ±1o。
4．控温系统：采用Inteligent数字式温控仪表，实时Automati调整PID控制参数。
温度控制范围 0--200℃ 、 测温控制 ≤±0.3℃、温度分辩率 0.1℃。
5. 数输方式：RS232传输
6．显示方式:Vulcanize－105 WIN-XP测试软件计算机屏幕显示，加上优良的用户
软件和的硬件设备使得整个测量变得方便、快捷、和愉快。
7．模腔：Cr6wv材质，合GB/T16584－1996标准要求。
8．测控方式：人性化的测控方式，鼠标即点即用或主机面板轻触按键两种试验方式
二. GC7028无转子硫化仪软件功能介绍
1．测试标准化：合GB/T16584《橡胶－用无转子硫化仪测定特性硫化》、ISO6502:
1991及AS5289－95 。
2．试品资料：设定的胶料编号名，如“外胎5号”，“RBS6“等等。用户如需另加标题
名称说明打印的图纸时，可设定任何形式的标题文字说明。
3．功能的说明：人性化设计的优良功能是在测试过程中可以修改测量时间，
胶料估计20分钟硫化完成，设20分钟测量时间，实做11分钟时发现9分，10分处就已经硫化完成，这时已没要再往下做，“修改测量时间”下的20分为9分或10分，按“送出”，实验立即停止在9或10分上，画出完整硫化曲线，计算出数据。如果实验做到18分，19分钟要结束时硫化曲线仍在往上升，硫化还未完成，实验须再往下做，否则得出的数据是错误的。这时可修改测量时间为25分或更多，让实验继续，直到硫化完成为止。这一功能无疑大大方便了用户，节约了宝贵时间和胶料。
4．图形曲线尺度自动化Auto Scale，测量完成后，软件将根据测量数值大小按0—5
Mv 0—10Mv 0-20Mv自动调整Y标度，使曲线更美观，多曲线对比，不同的胶料，不同的曲线形状，不同的测量时间，亦可进行对比。
5．数据库：软件预先设定了100个编号的数据库。每一个库可以存入无限组测量数据。面对几个月几年几十年成千上万组数据日后查询方便，用户可以将不同时间段的数据放入不同的数据库中，设定数据库地址的目的就在于此。
6．测试结束自动存档，测试完毕自动求算t10、t30、t50、t70、t90、ts1、ts2、Vc1、Vc2、
扭矩、小扭矩等等。
三. GC7028无转子硫化仪附件
1. 无转子硫化仪一年保固书及中文操作说明书各一份。
2. 无转子硫化仪测试软件一份。
3. 品牌电脑一套、彩色打印机一台。
四. GC7028无转子硫化仪主要计数指标
1．测温范围：0℃－200℃
2．测温：≤ ±0.3℃
3．控温：≤ ±0.3℃
4．温度分辨率：0.1℃
5．力矩量程：0－10N.m 0－20N.m
6．力矩解析度：0.001N.m
7．模腔频率：1.7Hz
8．振幅：±0.5o ±1o
9. 环境温度：0－35℃相对湿度<80％
10．硫化时间设定范围：2－300min
11．配气0.5MPa
12．电源 交流220V 800W
13．机台尺寸：约660×580×1300mm
14．机台重量：约210Kg。
No rotor curing
Number: GD
Specification: GC7028
A GC7028. No major technical index rheometer
1 high precision sensors: 0~20N.m. Resolution: 0.001N.m.
2 control system: adopts computer control and interface board for acquisition, storage, processing and printing node test data
Fruit and curve processing.
3 rotation system: step Electronics speed regulating motor + amplitude regulator. Swing angle: ± 0.5o ± 1o.
4 temperature control system: uses the Inteligent dial temperature control instrument, Automati real time adjustment of PID control parameters.
Temperature control range 0--200 ℃, temperature control precision is ± 0.3 ℃, 0.1 ℃ temperature resolution.
5 data tranission: the tranission of RS232
6 Display Mode: Vulcanize－105 WIN-XP test software of computer screen display, excellent user plus
Software and advanced hardware equipment makes the whole measurement becomes very convenient, quick, accurate and pleasant.
7 cavity: Cr6wv material, in line with the requirements of GB/T standard.
Control mode: 8 means of humanity, the mouse which or the host panel touch key two ways of testing
Two. No GC7028 software rotor curing
function introduction
1ISO6502:The 1 test standard: meet GB/T16584 "rubber - with no rotor curing properties of vulcanized Determination", ISO6502:
1991及AS5289－95 。
1991 and AS5289－95.
2 test data: the adhesive number set, such as "tire No. 5", "RBS6" etc.. If you need additional title
he name of the print drawings, can be set to any form of Title text.
Note 3: excellent quality functions function of humanized design can be modified measurement time during the test,
Rubber vulcanized complete estimates for 20 minutes, 20 minutes to measure time, do 11 minutes 9 points, 10 points is already finishing vulcanization, then have no need to do, just "to modify the measurement time" under the 20 points to 9 points or 10 points, according to the "send", the experiment immediately s at 9 or 10 points, to draw a complete vulcanization curve, calculate all data. If the experiment is done 18 minutes, 19 minutes to the end of vulcanization curve is still rising, curing is not complete, the experiment must be to do, otherwise the data is the error. It can modify the measurement time of 25 minutes or more, let the experiment continued, until the curing is completed. This function will undoubtedly greatly convenient for users, saving time and glue.
4 the curve scale automatic optimization of Auto Scale, the measurement is completed, the software will measure the size of the 0 - 5
Mv 0 - 10Mv 0-20Mv to automatically adjust the Y scale, the curve is more beautiful, more curve comparison, glue is completely different, the shape of the curve of different, different measured time, can also be compared.
5 database: software pre set 100 number database. Each library can be stored in the infinite set of measured data. In the months and years decades later tens of thousands of sets of data query, the user can be in different time data in different databases, this is the address of the database to set.
6 the end of the test automatically archived, testing is completed automatically calculates the T10, T30, T50, T70, T90, TS1, TS2, Vc1, Vc2,
The maximum torque, minimum torque etc..
Three. GC7028 no rotor curing accessories
1 no rotor curing one year warranty book and a copy of the Chinese operating instructions.
2 no rotor curing a special test software.
A set of 3 brand computer, a color printer.
Four. GC7028 has no major count index rheometer
1: 0 ℃ temperature range 200 ℃
2: the measurement precision is ± 0.3 ℃
3: temperature control precision is ± 0.3 ℃
4 temperature: 0.1 ℃ resolution
The 5 torque range: 0－10N.m 0－20N.m
The 6 torque resolution: 0.001N.m
7 cavity frequency: 1.7Hz
Amplitude: 8 ± 0.5o ± 1o
9: 0－35 ℃ ambient temperature relative humidity <80%
10 vulcanization time setting range: 2－300min
11 valve 0.5MPa
12 power to AC 220V 800W
13 sizes: 660 x 580 x 1300mm
14 the machine weight: about 210Kg.
