耐电痕指数测定仪-按键式
编号：GD
规格：NLD-B
试验电压：0-600V
耐电痕化指数测定仪
NLD-B-按键式
产品名称：耐电痕化指数测定仪
设备型号：NLD-B
满足标准：
漏电起痕试验（电痕化指数试验）是 IEC60112 、IEC60335、 IEC884-1、GB2099.1、UL 746A、GB/T4207、GB4706.1 AS 3638-92等标准规定的模拟试验项目。
产品概述：
漏电起痕试验（电痕化指数试验）是在固体缘材料表面上，在规定尺寸 (2mm×5mm) 的铂电之间，施加某一电压并定时 (30s) 定高度 (35mm) 滴下规定液滴体积的导电液体 (0.1%NH 4 CL) ，用以评价固体缘材料表面在电场和潮湿或污染介质联合作用下的耐漏电性能，测定其相比电痕化指数 (1) 和耐电痕化指数 (PT1) 。 漏电起痕试验仪（电痕化指数试验仪）仪适用于照明设备、低压电器、家用电器、机床电器、电机、电动工具、电子仪器、电工仪表、信息技术设备的研究、生产和质检部门，也适用于缘材料、工程塑料、电气连接件、辅件行业。
技术参数：
1、 电材料：电头 — 铂金属（白金）
2、 电压力：1.0±0.05N
3、 电距离：4.0mm ±0.01mm，夹角 60°±5
4、 电电压：100-600V（48~60HZ）可调，短路电流在1.0±0.1A时电压下降小于10%
5、 滴液高度：为30~40mm可调
6、 滴液大小：44-55滴/1cm3 可调
7、 滴液时间：30s±5s，
8、 滴液次数：0~9999次可调
9、 漏电判断：回路电流大于0.5A并维持2秒钟则继电器动作切断电流，指示样品不合格
10、试验过程：试验程序自动控制，抽风
11、参照标准：IEC60112 、 GB/T4207、GB4706.1
12、工作室体积：0.75m3（可根据不同标准定做0.5 m3 或 0.75m3）
13、设备外尺寸：630mm宽×390mm深×750mm高
Proof tracking index tester
NLD-B-push-button
Produ Name: Proof tracking index tester
Equipment Te: NLD-B
Meet the standard:
Tracking test (tracking index test) is IEC60112, IEC60335, IEC884-1, GB2099.1, UL 746A, GB/T4207, GB4706.1 AS 3638-92 and other standards for simulation and pilot projes.
Produ Overview:
Tracking test (tracking index test) is on the surface of the solid insulating material, the required size (2mm × 5mm) between platinum elerodes, a voltage is applied and the time (30s) given height (35mm) provides fluid ping Drop volume of conduive liquids (0.1% NH 4 CL), to evaluate the solid insulating material surface wet or contaminated in the field and under the combined effes of media leakage resistance performance, measured comparative tracking index (1) and resistance to tracking index of (PT1). Tracking tester (tracking index tester) apparatus for lighting equipment, low-voltage elerical appliances, household appliances, elerical machines, motors, power tools, eleronic equipment, elerical instruments, information technology equipment, research, produion and quality control departments , but also for insulation, plastic, elerical conneors, accessories and parts industry.
Technical parameters:
1, the elerode material: the elerode tip - platinum (Platinum)
2, the elerode pressure: 1.0 ± 0.05N
3, the elerode distance: 4.0mm ± 0.01mm, angle of 60 ° ± 5
4, the elerode voltage :100-600V (48 ~ 60HZ) adjustable, short-circuit current in the 1.0 ± 0.1A voltage drop is less than 10%
5, dropping height: 30 ~ 40mm is adjustable
6, dropping size :44-55 drops / 1cm3 adjustable
7, dropping time: 30s ± 5s,
8, : 0 ~ 9999 times adjustable
9, leakage judge: loop current is greater than 0.5A and maintained for 2 seconds then relay cut off the current, indicating samples failed
10, the testing process: Test program automatic control, independent ventilation
11, the reference standard: IEC60112, GB/T4207, GB4706.1
12, the studio volume: 0.75m3 (can be customized according to different standards 0.5 m3 or 0.75m3)
13, the device outside dimensions
