| 41 | 2.5 mm pitch |  | Series | TSF connector | -> Detail | |
| Te | Drawer connector, Double-row, Crimp style, Disconnectable te | |||||
| Rate(AC/DC) |
| |||||
| This TSF connector is a drawer connector with floating function which makes design of equipment easy.Putting the phase lag on four grounding contacts at both ends and other contacts of signal and power supply, the sequential connecting is realized. | ||||||
| 42 | 2.5 mm pitch |  | Series | XA connector (High box te) | -> Detail | |
| Te | Disconnectable te, Crimp style, High-box te, With locking device | |||||
| Rate(AC/DC) |
| |||||
| The header is tall and fully shrouded so as to prevent the resin used to coat the PC board coming into contact with the mating pins. Designed for use specifically with resin coated ("potted") PC boards. *The header is designed to accept XA mating receptacles. *Secure locking device prevents accidental disconnection. | ||||||
| 43 | 2.5 mm pitch |  | Series | XA connector (W to B) | -> Detail | |
| Te | Disconnectable te, Crimp style, With secure locking device | |||||
| Rate(AC/DC) |
| |||||
| *Secure locking device prevents accidental disconnection. *Header wafer is made of solder crack preventive material, gl-filled PA66 nylon. *Header pins are round and reflow-treated, which provides low insertion force. *Shrouded headers on radial-tape are also available. *Headers with polarizing bosses are also available. | ||||||
| 44 | 2.5 mm pitch |  | Series | XAD connector (W to B) | -> Detail | |
| Te | Disconnectable te, Crimp style, Double-row, With secure locking device | |||||
| Rate(AC/DC) |
| |||||
| *Double-row construction *Header wafer is made of solder crack preventive material, gl-filled PA66 nylon. *Secure locking device prevents accidental disconnection. | ||||||
| 45 | 2.5 mm pitch |  | Series | XH connector | -> Detail | |
| Te | Disconnectable te, Crimp style, Shrouded header te | |||||
| Rate(AC/DC) |
| |||||
| This connector was developed based on the high reliability and versatility of our NH series connectors. The connector is very all with mounting height of 9.8mm. | ||||||
| 46 | 2.5 mm pitch |  | Series | XH connector (High box te) | -> Detail | |
| Te | Disconnectable te, Crimp style, High-box te | |||||
| Rate(AC/DC) |
| |||||
| The header is tall and fully shrouded so as to prevent the resin used to coat the PC board coming into contact with the mating pins. Designed for use specifically with resin coated ("potted") PC boards. *The header is a designed to accept XH mating receptacles. | ||||||
| 47 | 2.5 mm pitch |  | Series | XM connector (High box te) | -> Detail | |
| Te | Disconnectable te, Crimp style, High-box te, With inner te secure locking device | |||||
| Rate(AC/DC) |
| |||||
| High-box te XM connector with 8.9mm depth and 2.0mm height after embly. | ||||||
| 48 | 2.5 mm pitch |  | Series | XNI connector | -> Detail | |
| Te | Crimp style, With secure locking device, Inertial lock structure | |||||
| Rate(AC/DC) |
| |||||
| This connector is 2.5mm pitch wire-to-board connector that has a mechani to prevent an incomplete mating by utilizing the inertial force when mating connector. In all circuits of connector, controlled key for preventing miatching of mating is added. | ||||||
| 49 | 2.54 mm pitch |  | Series | RA connector crimp style | -> Detail | |
| Te | Disconnectable te, Crimp style, I/O connector | |||||
| Rate(AC/DC) |
| |||||
| Crimp style receptacles that are designed to mate with headers conforming to MIL-C-83503. *Housing lances *The guide devices of both housing and header prevent reverse connector insertion. | ||||||
| 50 | 2.54 mm pitch |  | Series | RE connector | -> Detail | |
| Te | Disconnectable te, Crimp style, Internal connection for OA equipments | |||||
| Rate(AC/DC) |
| |||||
| Well suited for completing the internal connections of office automation equipment, such as personal computers, office computers, and their peripheral devices. *Double-leaf spring contact withstands the stresses caused by repeated mating and unmating.. | ||||||
| 51 | 2.54 mm pitch |  | Series | RF connector | -> Detail | |
| Te | Disconnectable te, Crimp style, Internal connection for OA equipments, Double-row | |||||
| Rate(AC/DC) |
| |||||
| Well suited for completing the internal connections of office automation equipment, such as personal computers, office computers, and their peripheral devices. *Double-leaf spring contact withstands the stresses caused by repeated mating and unmating.. | ||||||
| 52 | 3.5 mm pitch |  | Series | BD connector (3.5mm pitch) | -> Detail | |
| Te | Disconnectable te, Crimp style, For LCD back light lamps, With secure locking device | |||||
| Rate(AC/DC) |
| |||||
| Board-to-wire connector with high withstanding voltage, used for power supply of LCD (Liquid Crystal Display) back light. | ||||||
| 53 | 3.5 mm pitch |  | Series | BHS connector (W to B) | -> Detail | |
| Te | Disconnectable te, Crimp style, For LCD back light lamps, Compact te | |||||
| Rate(AC/DC) |
| |||||
| Low profile connectors with high withstanding voltage, designed for connecting liquid crystal display back light lamps to their starters. *T configuration *Its crimp style contact can be inserted into the housing with little force, thus making them suitable for use with flexible wires such as those insulated with silicone rubber. | ||||||
| 54 | 3.81 mm pitch |  | Series | JFA connector J300 series (W to B 3.81mm pitch) | -> Detail | |
| Te | Disconnectable te, Crimp style | |||||
| Rate(AC/DC) |
| |||||
| Connectors for signal circuit or power supply circuit, applicable to the factory automation, heavy electric machinery, and other industrial equipment in general. | ||||||
| 55 | 3.96 mm pitch |  | Series | HL connector (W to B) | -> Detail | |
| Te | Disconnectable te, Crimp style, Shrouded header te, With inner te secure locking device | |||||
| Rate(AC/DC) |
| |||||
| The HL connectors can be used for wire-to-wire or wire-to-board connections. *The inner-housing lock secures the plug to the receptacle and prevents accidental disconnection. *Secondary retainers (optional) | ||||||
| 56 | 3.96 mm pitch |  | Series | SDN connector | -> Detail | |
| Te | Board-in connector, Crimp style, Board-in connector | |||||
| Rate(AC/DC) |
| |||||
| This board-in connector is capable of connecting a wide variety of circuits including signal and power supply circuits. The connector features a slim, low-profile design. | ||||||
| 57 | 3.96 mm pitch |  | Series | VH connector | -> Detail | |
| Te | Disconnectable te, Crimp style, Compact te, With locking device | |||||
| Rate(AC/DC) |
| |||||
| This all, field-proven connector for PC boards is reliable and has a large current carrying capacity. It can be used with a wide variety of signal, power supply, and output circuits that appear in consumer electronic products. | ||||||
| 58 | 3.96 mm pitch |  | Series | VH connector (High box te) | -> Detail | |
| Te | Disconnectable te, Crimp style, High-box te, With locking device | |||||
| Rate(AC/DC) |
| |||||
| The header is tall and fully shrouded so as to prevent the resin used to coat the PC board coming into contact with the mating pins. Designed for use specifically with resin coated ("potted") PC boards. *The header is designed to accept VH mating receptacles. *The housing has a lock mechani which prevents the connector from coming loose due to vibration. The mechani also prevents misinsertion. | ||||||
| 59 | 3.96 mm pitch |  | Series | VU connector | -> Detail | |
| Te | Disconnectable te, Crimp style, With secure locking device | |||||
| Rate(AC/DC) |
| |||||
| VU connector is all te 3.96mm pitch PC board connector for large current and has the high reliability in a power supply circuit, considering the fully shrouded connector header structure against "vibrating connector" and "distored extraction". | ||||||
| 60 | 4.0 mm pitch |  | Series | BH connector (4.0mm pitch) | -> Detail | |
| Te | Disconnectable te, Crimp style, For LCD back light lamps | |||||
| Rate(AC/DC) |
| |||||
| Low profile connectors with high withstanding voltage, designed for connecting liquid crystal display back light lamps to their starters. *T configuration *Its crimp style contact can be inserted into the housing with little force, thus making them suitable for use with flexible wires such as those insulated with sillicone rubber. | ||||||
PH系列;ZH系列;XH系列;EH系列;VH系列，有意者请联系！
