Feasa LED寿命测试仪加速了LED从-65°C到125°C的测试和检验。用于测试的光纤已经经过了很的挑选，可以在-65°C to +125°C的温度下进行使用。Fease光学头材料也是经过精挑细选的，使其能够承受限温度。当寿命测试仪在进行运行时，测试仪置于烤箱外面对LED进行连续检测。
Feasa's LED Life Tter offers accelerated tting and monitoring of LEDs from -65°C to +125°C.The Fiber used in the tter has been specially seleed and prepared for use in temperatur of -65°C to +125°C. The Feasa Optical Heads have been digned from seleed materials to withstand extreme temperatur. The Tter sits outside the oven and the LEDs are monitored continuously during the Life Time Tt.
INTERFAC接口:
提供一个简单方便的U接口到测试仪，不需要额外的外部供电，波特率460800。
Uoffers a very simple interface to the LED Analyser with no requirement for an additional power supply. Very high baud rat, up to 460800 baud, are available.
RS232接口易用于波特率为115200，需要一外部电源供电。
TheRS232 Serial Portis easy to use with a max baud rate of 115200. It requir the use of an external power supply.
多个LED测试仪可以使用Daisy Chain接口串联，而使用一个U或者RS232接口连接到电脑，多可支持30个LED测试仪串联。
Multiple LED Analysers can be conneed together using the Daisy Chain Conneors. Only one RS232 Serial Port or U Port is required to conne up to 30 LED Analysers.
TT SOFTWARE测试软件：
测试软件能在固定的时间间隔内连续不断的对LED进行测试，在1秒和数小时之内的数据能及时存到硬盘，以备以后查看和绘制图形。
The Tt Software has the ability to continuously tt LEDs at fixed time intervals. Between 1 second and multiple hours data can be saved to disk for later retrival, reporting and graphing of rults.
测试软件可以配置发送邮件，当测试出现错误和测试结束时发送一封邮件。
The Tt Software can be configured to send an email on error and also at the end of a tt sequence.
SPECIFICATIONS参数：
ITEM | Specification |
光学OPTICAL 绿色峰值波长Green Peak Efficiency Wavelength 蓝色峰值波长Blue Peak Efficiency Wavelength 总的工作波长范围Total Operating Wavelength Range
|
615nm
x = + 0.0015, y = + 0.0015
5.0V
127mm x 57mm x 55mm |
Model and Te型号：
Te | Model |
Feasa 5 Channel LED Life Tter | Part No.: Feasa 5LT |
