仪器技术配置
The Solaris CCD Plus consists of the followingcomponents:
Solaris CCD Plus直读光谱仪由以下部分组成:
· OPTICAL SYSTEM /光学系统
· SPARK STAND /火花台
· SPARK SOURCE /火花光源
· Spectrometercontrol and Readout system/光谱仪控制系统和数据读出系统
· Metallab32 software/Metallab32 分析软件
· Dimension/尺寸
· Power supply/电源
Description Ofthe Components/各组成部件的描述:
· OPTICAL SYSTEM/光学系统
Multi CCD detectors system with7 CCD solid statedetectors
7块CCD检测器系统
Each CCD has 3,648 active elements (pixelsequivalent)
每块CCD3,648 像素
Resolution of full range 58,368 active elements(pixels) maximum
25,536 像素的分辨率(7 x 3,648 像素)
High luminosity holographic grating with 3600grooves per mm
全息衍射光栅，光栅刻线3600条/mm
Stabilized against fluctuations in temperature
温度稳定系统
Special material for drift free
采用材料应对漂移
Focal length 350 mm for all optical systems
光学焦距：350 mm
Spectral opticalwavelength: 140 – 450 nm
谱线波长：140 -450 nm
Automatic profiling full optical system
全光学系统自动寻迹
Argon flush tight optical chamber sealed againstlight and dust
氩气吹扫光学室可以避免灰尘、光线的干扰
· SPARK STAND/火花台
The open universal sparkstand allows to yse samples up to 20 Kg and suitable for samples indifferent forms
开放式火花台,可以分析重达20Kg的各种形状的样品
Theelectrode is easily removable for maintenance
电易于拆卸维护
Argonflushed spark stand with minimum consumption of Argon
氩气吹扫火花台，低氩气消耗
Quickchange with simple designed sample clamp for fast sample throughput
使用便捷的样品夹,支持快速样品更换
alladapters for different samples are also available for various kinds of samples(options)
不同样品的适配器可满足各种样品的需求（选配）
· SPARK SOURCE/火花光源
Fullautomatic controlled source
全自动控制火花源
Solidstate spark source semiconductor controlled
半导体控制放电激发
Plaacurrent from 1 to 100 A
1 到 100 A等离子体电流
The dischargeparameters are protected by pword
放电参数由保护
Variabledischarge parameters for individual ytical tasks
的分析要求可有不同的激发参数
Thespark source is stabilized against variations of the power supply
火花光源放电稳定，不受供电系统波动的影响
Excitationparameters controlled according to excitation lines and ytical programs
激发参数由激发线和分析程序标定和控制
Sparksource with variable parameters
火花源可有多种参数设置
SparkFrequency: 100 up to 1000 Hz (controllable)
火花频率: 100 到 to 1000 Hz (可控)
Sparktime 10-10000 us (controllable)
火花持续时间10-10000 us (可控)
· Spectrometer controland Readout system /控制和数据读出系统
Electronic system with integrators multi-channelsand Data System Acquisition PC controlled by microprocessor
电子系统具有微处理器控制的多通道积分和数据系统采集功能
High speed 16 Bit ADC
16位模数转换器
MixedSignal ISP Flash MCU 100 MHz
ISP混合信号Flash微控制器100MHz
SerialSource Interface
多种连接源
Highspeed readout with high speed interface U for fast data processing andcontrolling the system
读出及U接口支持快速数据控制与处理系统
7input for CCD modules. CCD modules selected by manufacturer
7块CCD模块，由制造商根据应用情况选择
· Metallab32 software/Metallab32分析软件
Forcalculation of calibration curves for each element into consideration ofvarious matrixes (references) available for ytical results
计算每种元素的校正曲线和多种基体线（参考线）
ARTCAL:standardization using a single sample
智能化 : 用一组标样即可完成标准化
EasyGUI (Graphic Interface User) system
便于操作的用户图形界面
Creationor modification ytical programs
创建或修改分析程序
Functionkeys for routine operations
常用的操作功能键
Outputunit selectable (intensities, intensities ratios, uncorrected concentrations,corrected concentrations etc.)
可选择的输出方式 (强度，强度比，未校正的浓度，校正后的浓度等)
Selectableconcentrations units (ppm, %)
可选择的浓度单位 (ppm, % )
Globalrecalibration
通用标准化
Minicalibration (Te recalibration)
微型标准化
Correctionof inter elemental interferences
校正元素间的干扰
Standarddeviation and relative standard deviation functions
自动标准化
Repeator reject one or more discharges
标准偏差和相对标准偏差功能
Determinete of alloy (quality name) according to the requested norm (UNI, ISO, DIN,EN, ASTM, JIS, etc.)
合金类型鉴定（UNI,ISO, DIN, EN, ASTM, JIS, 等）
Standardslibrary
标准物质库
Internationalnorms library
国际标准物质库
Qualityidentification
牌号鉴定
Calculation of Carbon equivalence or anyother parameter consequent to the ysis
支持C当量或其他参数的计算
Signalof out prefixed range elements
可标记出工作曲线范围的元素分析结果
STATISTICSOFTWARE functions
统计功能软件
Statisticcalculation
统计计算
Printingof all discharges or only the average of up more than 100 discharges, standarddeviation and relative standard deviation
可打印激发结果或是多100次的激发平均结果，及其标准偏差和相对标准偏差
Filing on Hard Disk of all data with possibilityof researching various keys
硬盘存储数据便于今后的研究分析
Connectionto external computers or central/server system
可连接外部计算机或中心系统
· DIMENSIONS and WEIGHT/尺寸及重量
Dimension/尺寸: P75 x L63 x H41cm
Weight/重量: 约 40 Kg
· POWER SUPPLY/电源
AC 110/220V +/-10%/单相
50/60 Hz， 10 A， 1.5 KVA
计算机配置要求
Brand PC（Dell, Lenovo, Hp）, Purchased By End-use/品牌电脑(Dell,Lenovo, Hp)，用户可自己购买
Processor/处理器 2.0GHz
Memory/内存 2GB
Hard Disk/硬盘 200G
Optical Driver/光驱 DVD RW
U Port/U接口 2.0,3.0
Display/显示器 19’
Operating System/操作系统 WindowsXP, Window 7 32位
