A.Brief Introduion
DMK-L seri are the most stable two-step fully-automatic pet stretch-blow moulding machin(preheat). It has two to eight caviti and the maximum capacity of the produs is 2L. It can blow bottl in shap: carbonated, mineral, pticide, coetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline te, such as PET and PP etc.
1).High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:3000BPH(3-cavity), 4000BPH(4-cavity), 6000BPH(6-cavity), 8000BPH(8-cavity).
5).No Contamination:Closed produion zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of elericity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspeion, low noise.
B.Settings:
a).PLC colour display: SIEMENS(GERMANY)
b).Pneumatic parts:FTO(GERMANY)
c).Controller of preform transfer:Servo motor National(JAPAN)
d).Other eleric parts are all world-famous brand
C.Machine Featur:
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottl rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shap by adjusting the light tube and the length of the refleing board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeti with security automatic-locking apparatus in each mechanical aion, which will make the procedur turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the aion instead of the oil pump.
C.7. Satisfaion with different atmospheric prsure for blowing and mechanical aion by dividing the blowing and aion into three parts in the air prsure diagram of the machine.
C.8. Strong clamping force with high prsure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique dign of the position of valve to make the air prsure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological procs.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effe of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejeion rate: ls than 0.2 percent.
D. Technical Parameter:
TE | ITEM | DMK-L3 | DMK-L4 | DMK-L6 | DMK-L8 |
CONTAINER | Theoretical output | 3000 | 4000 | 6000 | 8000 |
Max.container volume | 2L | 2L | 0.7L | 0.7L | |
Max.neck diameter | 38mm | 38mm | 38mm | 38mm | |
Max.container diameter | 105mm | 105mm | 70mm | 70mm | |
Max.container height | 335mm | 335mm | 250mm | 250mm | |
Max.perform height | 150mm | 150mm | 130mm | 130mm | |
Number of cavity | 3 | 4 | 6 | 8 | |
ELERICAL SYSTEM | Motor power | 3KW | 3KW | 3KW | 3KW |
Heating power | 30KW | 33KW | 35KW | 45KW | |
Aual total power | 33KW | 36KW | 38KW | 48KW | |
AIR SYSTEM | Operataiting low prsure | 0.7Mpa | 0.7Mpa | 0.8–1.0Mpa | 0.8–1.0Mpa |
Low prsure consuming | 0.6-0.8m3/min | 0.6-0.9m3/min | 0.7-0.9m3/min | 0.7-1.0m3/min | |
Blowing prsure | 3.5Mpa | 3.5Mpa | 3.5Mpa | 3.5Mpa | |
High prsure consuming | 2-3m3/min | 3-4m3/min | 4-5m3/min | 5-6m3/min | |
CHILLER WHATER | Operating prsure | 0.3-0.5Mpa | 0.3-0.5Mpa | 0.3-0.5Mpa | 0.3-0.5Mpa |
Temperature | –10℃~55℃ | –10℃~55℃ | –10℃~55℃ | –10℃~55℃ | |
Flow rater | 40L/min | 40L/min | 50L/min | 70L/min | |
MACHINE | Machine dimension | 3.5x2x2.2m | 4x2x2.2m | 4.9x2.15x2.2m | 5.5x2.2x2.2m |
Machine weight | 4200Kg | 4800Kg | 5000Kg | 5800Kg |