声波测距仪具有以下功能:

1.移动测距功能;

2.可自动计算面积与体积;

3.轻便,容易使用与携带;

4.准确到小数点后2位;

5.自动关机功能;6.低电显示功能，测试距离为20M

包装：双面吸塑

规格：
电池：1个9V的电池。（不包括）
测量仪的单位是英尺和米。
度：0.005+1
频率：40千赫
测量范围：0.45到18.0米

CP-3007 Ultrasonic Distance Measurer OWNER’S MANUAL

PREPARATION

INSTALLING BATTERI

Your measurer requir 9V battery (t supply) for power. For the performance and life, we recommend alkaline battery.

Follow the steps to install a battery.

Caution: If you do t plan to use the measurer for a month or more, remove the battery, Batteri can leak chemicals that can dtroy eleronic parts.

STABILIZING THE MEASURER

Your measurer is sensitive to chang in temperature and humidity. Before you use the measurer, wait about 15~30 minut for it to stabilize to the current room’s temperature.

OPERATION

TURNING The MEASURER ON/OFF

To turn on the measurer, prsMEASURER. The measurer turns itself off if key is prsed within about 1 minute.

TAKING A MEASUREMENT

t:

The measurement appears for about 1 minute (or longer if you prs ather key)

ERROR might appear if you try to measure a distance shorter than the range of 1.5 feet (0.45m) or longer than 60 feet (18.0meters)

Measuring Tips

Some te of curtains and blinds can absorb sound w.

Causing measurements to be inaccurate. If you are measuring distanc in a room with curtains. open the curtains before measuring the distance to a window behind them. Also, be sure that the window is closed.

If there is t clear path between the points where you are measuring. you might receive a false reading from sound w bouncing off objes such as chairs, tabl and objes with uneven surfac. If you are t sure if a measurement is corre, move slightly to one side then measure the distance again.

If the surface of a wall you are measuring is t sold and flat, or if you are measuring in a narrow corridor. You might receive a false reading .if this happens, use a sold surface to measure or move to the center of the corridor.

To measure a distance longer than 60 feet (18.288 meters) Sele a point in the middle of the room (for example) measure from the center of the room toward each side. then add the two measurements.

SING A MEASUREMENT

te: Data of AREA or VOLUME can t be sed.

CALCULATING VOLUME

To find the volume of a room, Measure the height. Width and the length of the room and store each measurement in a different memory location (see “Sing a Measurement”). Then prsVOLUME,The volume calculation rult appear.

CALCULATION AREA

Follow the steps to find the area of any two stored measurements

ADDING/SUBSTRAING STORED MEASUREMENTS

USING LASER

To he a laser pointer, prsLASER. The laser pointer disappears automatically after about five seconds

USING BACKLIGHT

You can light up the display screen with the “LIGHT” key for easy viewing, even in a dimly lit area.

SPECIFICATIONS

Power 1x9V

Unit of measurement Feet or Meters

Accuracy 0.5%+1 di (8~60ft)

Working Frequency 40kHz

Working Temperature 32” to 109.4” F(0” to 43” C)

Range 1.5 to 60 ft (0.45 to 180288m)

Specifications are tical; individual units might vary.

Specifications are subje to change and improvement without tice.

Caution:

The laser emitted from the unit is visible laser of 650nm welength

Don’t stare into the laser beam and also don’t shoot laser beam to any other’s ey.

Cl II laser produ Output < 1 mw

t:

The produ has ped EN60825-1

Corrponding label is affixed on the back of the unit.

+