UT75A-000-10-00

UT75A-000-10-00

UT75A数字指示调节仪选型表：

性能、可用性和灵活性得到提高，满足先进控制需求，适合多种应用。

• 丰富的配方管理，有效提高生产性

• 支持CC-Link、Profibus和DeviceNet通信协议，能够轻松连接管理配方的PLC

• 程序模式由多达20个程序段组成

• 两条回路运行程序模式

• 丰富的配方管理有效提高生产性

• 在20个配方中轻松切换

• 程序模式运行

• 通过PLC轻松实现配方切换

• 减少工程成本以及外围设备

• 支持CC-Link、Profibus和DeviceNet通信协议(可选)

• 通过梯形图程序同样可以完成复杂的I/O偏移计算和报警顺序控制

• 通过定制的梯形图指令，能够将数字运算等多行梯形图程序简化为单行

• 简化梯形图程序

• 能够减少外部运算器和顺序控制回路(继电器、计时器等)

• 无需任何程序，通过PLC即可实现通信

• 保护用户的知识与技术

• 通过定制的梯形图指令，能够将数字运算等多行梯形图程序简化为单行

• 通过密码实现定制梯形图程序的安全管理

• 使用梯形图程序可以创建定制的算术表达式

• UT750的继承与发扬

• 能够进行平方根、指数、对数运算

• 能够进行温度/湿度和CP计算

• 15种基本指令和111种应用指令

• 梯形图程序可多达1,000步

• 两条回路可以同时或者单独运行

• 可实现程序模式运行和常数运行的双回路控制

• 一台调节器，两条回路

• 多种算术指令，大量的梯形图程序

• 支持先进的算术指令

• 减少停机时间

• 简单的拷贝，即可在另一台调节器上设定参数

• 在表盘上安装调节器之前即可设定参数

• 调节器不通电源也同样可以设定参数

• 一台备份调节器可用于不同控制对象的多种传感器和加热器/执行器

• 通用输入和输出

• 通过LL50A轻松实现参数设定和转换

Advanced Digital Indicating Controller UT75A

The Enhanced Peformance, Usability, and Flexibility Meet the Advanced Control Needs in a Wide Variety of Applications

Switching between 20 Recipes

• Increasing yield by managing a variety of recipes

• Increasing quality in combination with 16 PID values

Program pattern operation

• Program pattern consists of up to 20 segments

• 2-loop program pattern can be operated

Easy to switch between recipes with a PLC

• Since CC-Link, Profibus, and DeviceNet are supported, it is easy to link to a PLC that manages recipes

Simplifying ladder programs

• Multi-line ladder programs such as numerical calculation can be turned into a single line using a custom ladder instruction.
  - This simplifies the ladder programs and facilitates easy engineering and maintenance.
  - Created custom ladder instructions can be saved in a file.
  - Custom ladder instructions saved in a file can be used by another UT75A controller.

External calculators and sequence control circuits (relay, timer, etc.) can be reduced

• Complex I/O offset calculation and alarm sequence control can be accomplished using a ladder program
  - Engineering costs such as wiring and initial setup can be reduced significantly.
  - A sequence over 2 loops can be created for 2-loop control
  

Communication with a PLC is possible without using any program

• CC-Link, Profibus, and DeviceNet are supported (optional)
  - Since communication with the PLC without using any program is possible, engineering costs can reduced.

Custom arithmetic expressions can be created using a ladder program

• Multi-line ladder programs such as numerical calculation can be simplified into a single line using a custom ladder program

• Custom ladder programs are securely managed using passwords
  - Custom arithmetic expressions can be made inaccessible to protect the knowledge of users

2-loop control with a single controller

• 2-loop synchronous and independent operation is available
  - The start and stop instructions can be run synchronously or independently.

• Program pattern operation and constant value operation are available for 2-loop control
  - A sequence can be run by combining the program pattern operation and fixed-point operation.

A variety of arithmetic instructions and large capacity ladder programs

• 15 basic instructions and 111 application instructions

• Ladder program capacity up to 1,000 steps

Advanced arithmetic instructions are available

• Square root, exponential, and logarithmic calculations are available

• Temperature/humidity and CP calculations are available

Universal input and output

• A single backup controller can be used for different control objects with different types of sensors and heaters/actuators
  - The UT75A can flexibly respond to a failure and sudden specification changes.

Simple parameter setting and transition using an LL50A

• Parameters can be set on other controllers just by copying them

• Parameters can be set before mounting the controller to the panel

• Parameters can be set without power supply for the controller