|
一:功能FUNCTIONS:
1.喷油泵调速特性曲线动态快览。（Quick view the characteristic curve of governor with dynamic.)
2.测量不同转速时的齿杆行程。（Measurement of rack travel at any speed.)
3.测量不同转速时的各缸供油量（Measurement ofeach cylinder delivery at any speed.)
4.静态检查各缸供油时间（Checking of each cylinder injection timing with static.)
5.对喷油泵进行密封性试验（Checking of the sealing injection pump body.)
6.检查机械调速器性能。（Checking of the mechanical governor.)
7.检查气动调速气性能。（Checking of he pneumatic governor.)
8.检查气膜调速器负压性能（Checking of the vacuum capacity of governor.)
9.检查压力补偿器性能（Checking of the mainifold pressure compensators(LDA))
10.测量分配泵泵体内压。（Measurement of the internal pressure of distributor pump body.）
11.分配泵益流量测量（Measurement of the reflux delivery of distributor pump body.）
12.分配泵电磁阀试验（Testing of the electromagnetic valve of distributor pump.)
13.检查输油泵（Checking of transfer pump.)
14.检查提前器性能（Ckecking of the advance angle of advance device.)
二.特点CHARACTERISTIC
1.喷油泵调速特性曲线动态快览（Quick view the characteristic curve of governor with dynamic.)
2.工业控制计算机——一体工作站测量控制（Control and measrue by industrial computer work station.)
3.高分辩率、真彩色液晶屏显（High definition ,LCD display.)
4.调速方式、随心所欲。手动调速、数字调速、程序化档转速预置
（ways to adjust speed ,hand , digital ,pro-grammed steps preset.)
5.可建立喷油泵数据库，并可以利用该数据库直接控制试验台运行。（You can set up database of pump and
use it control test bench.)
6.可录制、绘制、调用调速特性曲线图。(It can record,createand load a curve of governor.
7.可建立速调特性曲线图。(You can set up database of governors curve.)
8.测试曲线与标准曲线对比。（You can compare the test curve with the standard curve of governor.)
9.可生成喷油泵测试。（You can get a test report of a tested pump.)
10.标准打印机接口（Standard port of printer.)
11.上网（可选）。(Connect to internet(on request))
12.各项功能有计算机软件控制，（Every function is done by computer and software.）
三.参数PARAMETERS
1 输出功率（Output power）:7.5KW,11KW,15KW
2 输出电源（Electronical supply）:三相（3-Phase)380V/50HZ(或根据要求or on request)
3.中心高（Interaxe height):125mm
4.量筒(Graduates):45CC,150CC
5.燃油箱容积（Volume of fuel tank):60L
6.提供直流电源（DC.Supply):12/24v
7.供油压力（Feeding fuel pressure）:低压（Low）:0-0.4Mpa 高压（High）:0-4Mpa
8.调速范围（Range of speed）:+/-4000RPM
9.齿杆测量范围(Range of rack):0-25mm
10.气压（Air pressure):-50 +300Kpa）
11.油温自动控制(Control fuel temerature):40+/-2度 |
