商品描述：产品名称：JL645B拉动机械计数器
联系人： 张先生
工作原理及简介：JL645B计数器是一种通用的五位拉动式机械计数器，用于累加记录机械往复运动的次数，不设回零机构。当记满99999时再从00000开始下一循环计数。计数器的计数轮为内齿传动。当拉动计数器拐臂时，与拐臂相联接得推进机构使计数轮进行加法计数。此种计数器主要应用于开关电器、实验设备和印刷设备等行业。
产品系列及相关技术参数：
显示数字 | 高×宽 4mm×2mm |
积算容量 | 99999 |
额定速率 | 300次/分钟 |
传动比 | 1：1 |
工作环境温度 | -10℃～+50℃ |
工作环境湿度 | ≤85% |
转动力矩 | ≤1N·cm |
拉动角 | 小：37° ：49° |
可根据客户需求设计制作 | |
产品安装尺寸图：
Product name: JL645B Pulling Mechanical Counter
Working principle & Introduction: JL645 counter is a kind of general 5 digits pulling mechanical counter f, it is used to record the accumulative times of the mechanical reciprocating movement. It has no reset resign. When the counter times reach to 99999, re-counting can restart from 00000. Its counting wheels are driven by inside pinions. When the arm of the counter is pulled, the driving mechanism connected to arm will make the counter carry out addition counting. This kind of counter is mainly used in the industries such as high-voltage switch, testing equipment and printing equipment etc.
Technical parameters:
Display digit size | H×W:4mm×2mm |
Max. capacity of accumulative counting | 99999 |
Counting speed | 300times/min |
Transmission ratio | 1:1 |
Operating ambient temperature | -10℃～+50℃ |
Operating ambient relative humidity | ≤85% |
Torque | ≤1N·cm |
Pulling angle | Min. ：37° , Max.：49° |
This product can be designed and manufactured according to customer’s needs | |
Product installation & dimension diagram:
