| 一、功能概述: | | | | |
| 1、 | 低启动电流和工作电流 | | | | |
| 2、 | 内置前沿消隐(LEB) | | | | |
| 3、 | 内置峰值电流补偿和同步斜坡补偿 | | | | |
| 4、 | 内置抖频功能可以降低EMI | | | | |
| 5、 | 逐周期限制电流 | | | | |
| 6、 | 空载或轻载时采用降频和跳周期工作模式减少损耗 | | | | |
| 7、 | 异常情况过流保护 | | | | |
| 8、 | 过压、欠压、开环、过载、过温、输出短路等保护 | | | | |
| 9、 | 在待机时进入跳周期模式,待机功率低,合“能源之星”等待机功耗 | | |
| 二、参数规格:(可以按客户的要求进行定做) | | | | |
| Output DC 输出直流电压 | 9V | 9V |
| Rated Current 额定电流 | 1A | 1A |
| 输 | Rated Power 额定功率 | 10W | 10W |
| 出 | Ripple and noise 纹波与噪音 | &plun;1% | 50mVp-p |
| 特 | Voltage adjustment range 电压调整范围 | &plun;0.5% |
| 性 | Voltage Accuracy 电压 | &plun;1% | 2% |
| Line regulation 线性调整率 | &plun;0.5% |
| Load Regulation 负载调整率 | &plun;0.5% |
| Compact size, high reliability 体积小,性高 | | | |
| Built-in EMI filter 内置EMI滤波器 | | | |
| 100% full load burn-in test 100% 满负荷性(老化)测试 | | | |
| Protections: overload/ short circuit 保护功能:过载/短路 | | | |
| 2 years limited warranty 2年有限保修 | | | | |
| Size(L*W*H):91*47*27 (mm) | | | | |
| AC input voltagerange 交流输入电压范围 | 85~265VAC (210~370VDC) |
| Input current 交流输入电流 | 0.5A |
| Input frequency 输入频率 | 47~63Hz |
| Inrush current 浪涌电流 | cold start, 5A/230V 冷启动,10A/230V |
| Input leakage current 输入漏电流 | ≤0.5mA/ 230VAC |
| Line regulation (full load) 线性调整率(满载) | 0.50% |
| Output voltage adjust range 输出电压调整范围 | 1% |
| Output overload protection 输出过载的保护 | 110~130% |
| Rise time 上升时间 | 50ms full load (tical) 50ms 满载(典型值) |
| Start time 启动时间 | 20ms full load (tical) 20ms的满载(典型值) |
| Operating temperature 工作温度 | ... -20~+70 |
| Storage temperature 存储温度 | ... -20~+85 |
| Cooling method 冷却方法 | convection 对流 |
| 三、产品安装尺寸图: | | | | |

|