BQJ-1型半自动气雾剂水浴检测槽
生产能力：以每罐在水中浸泡三分钟计算。
双线5000罐/小时 单线2500罐/小时
水温控制范围：30℃-60℃ 允许温差:&plun;1℃
加温方法：（1）电加热 （2）蒸气加温
爆型电加温功率：18KW 电压：380V
加温时间：1小时（水温4℃时）
储水量：0.85T 水槽长度：6300mm
该设备用不锈钢平顶链加磁铁将被检测马口铁气雾罐紧紧吸住,在温水中通过，通过的速度根据气雾剂产品的检测标准来确定。
Model BQJ-1 Semi-automatic Water-bath Test Tank for Aerosol Cans
Capacity：Counted by each can immersion in water for two minutes.
Single line：2500can/hr
Water temperature controlled range：30℃ to 60℃, allowance of temperature difference：&plun;1℃
Heating method：Electric heating or Steam heating
Explosion-proof electric heating power：21KW. VoItage：380V
Heating time：1 hour(when the original water temperature is 4℃)
Water capacity：0.85T. Length of water tank：6300㎜
This equipment uses stainless steel plain- chains and permanent magnets to attract the tinplate aerosol cans to be tested firmly and to carry them ping through warm water. The ping speed is determined by the test standard of aerosol products.
