供应台湾鹰牌附表磁座高度设定器，Z轴高度设定器

               1.   Locate the height presetter on a place suitable for a reference surface of work piece.

               2.   Apply the cutter on the measuring surface and slowly lower the Z-axis. Then, cutter gets near to the measuring position.

               3.   A distance from the reference surface to the tool tip can be measured easily but precisely so that this presetter is most suitable t only for machining centers but for NC lathes and NC milling machines.

l        Magnetic base function can be used in vertical position & horizontal position.

l        HEIGHT: 100mm &plun; 0.005