■对应各国的粗度规格表示机。
■大型LCD屏幕窗口，易于清晰读取。
■使用触控式面板（具污性），操作简易。
■可将数据储存于记忆卡（选购品）。
■任意长度设定机能。
■按PRINT键即可藉由内藏式打印机打印出量测之结果（可选择不同之打印方式）。
■内藏充电电池，本体携带方便也可收置检出器。
■拥有丰富的参数：自动校正机能、统计处理、合否判定机能、客户自行编辑设计机能判定机能
平移范围12.5mm（5"）
测量范围300μm（&plun;150μm）[12000μinch（&plun;6000μinch）]
驱动/检测元件探测仪:178-390/178-395
测头:金刚石
测量力:4mN/0.75mN
探测方式:微感应
评定轮廓P，R
估计参数Ra,Ry,Rz,Rt,Rp,Rq,,S,Pc,P3z,mr
数字过滤2CR-75%,2CR-75% PC,Gaussian-50%
截至λC 0.25,0.8,2.5mm
波长λS 2.5,8μm
取样长度（L）0.25,0.8,2.5mm
显示LCD
打印机－－－－
放大垂直－－－－
倍数水平－－－－
数据输出通过RS232C接口/SPC输出
电源通过AC适配器/电池（可充电）
尺寸62&tim;156.5&tim;52mm
重量0.48kg
| Seri SJ seri | |
| FEATUR: Technical Data X-axis (drive unit) Measuring range: .49" (12.5mm) Measuring speed: .01", .02"/s (0.25, 0.5mm/s) .01"/s (0.25mm/s: S-te) Traversing direion: Backward Deteor Range: 13780µin (-7880µin to+5900µin) {350µm (-200µm to +150µm)} Deteing method: Skid measurement Measuring force: 4mN or 0.75mN (low force te) Stylus tip: Diamond, 90°/5µmR (60¨¬/2µmR: low force te) Skid radius of curvature: 40mm Skid force: ls than 400mN Deteing method: Differential induance Power supply: Via AC adapter / rechargeable battery Battery life: Max. 600 measurements (w/o printing) Recharge time: 15 hours Data output Via RS-232C interface / SPC output Dimensions (WxDxH) Control unit: 6.7 x 2.4 x 2.0" 156.5 x 62 x 52mm} (SJ-201) 4.5 x .90 x 1.02" Drive unit: 115 x 23 x 26mm M Control unit: Approx. 0.3kg (SJ-201) Drive unit: 0.2kg Evaluation Capability: SJ-201 Applicable standard: JIS"82, JIS"94, JIS"01, DIN, ISO, ANSI sed profile: Primary profile le (P), Roughns profile (R), DIN4776 (Primary profile (P), Roughns profile (R), MOTIF (R):M-te) Evaluation parameters: Ra, Ry, Rz, Rq, S, , Pc, R3z, mr (c), Rt, Rp, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo (can be customized) (R, AR, Rx: M-te) Dial filter 2CR, PC75, Gaussian Cut-off length ëc: .01, .03, .1" (0.25, 0.8, 2.5mm) ës: 1", .3" (2.5, 8mm). Number of sampling length: X1, X3, X5 Arbitrary length: .01"&plun; to .49"&plun; (0.3 to 12.5mm) .01"&plun; (0.1mm) increments Sampling length (L): .01, .03, .1" (0.25, 0.8, 2.5mm) Funion Customization: Dired parameters can be seleed for calculation and display.GO/NG judgment: Upper / lower limit setting: 2 parameters Measurement conditions saving: Sav the conditions when the power is turned off. Data saving: A maximum of 10 measurement rults can be saved. Calibration: Auto-calibration with the entry of numerical value Power saving funion: If the auto-power-off funion is ON then power turns off if no operation for 30 seconds. AC adapter:526688A Battery pack:12BAA240 |
