基于电流的刀具破损检测系统

TECHNA-CHECKTC101

TECHNA-CHECKTC101系统为可监控一个驱动轴或加工过程的独立系统，可通过用户接口进行简单设置或通过基于Windows的“TOOLMOON”软件在外围PC端进行编程设置。

The TC101 is a stand alone system capable of monitoring 1 tool or cutting profile. Programming can be done through the face plate but is preferably done with the Toolmon software.
特点：
*LED显示功能
*每一驱动轴单一加工过程监控
*匹配传感器类型有：PWM125，PWM3100A或VM100
*通过自身面板或通过外围PC“TOOLMON”软件即可完成参数设置
*通过由RS232/RS485接口连接的PC和"TOOLMON"软件可至多连网24个该单元进行数据收集操作
*方便安装于电控柜处或用户指定的其他位置
*独立的刀具状态（断裂，磨损，无刀，空运行）限值设定
*接触点监测功能适用于研磨和平衡设备监控
*经济实用型监控系统

? LED display

? Monitors 1 tool or cutting process per motor

? Available sensors PWM125, PWM3100A, VM100

? Parameter setup is done through the front plate of the unit or using the included Toolmon software

? Capable of networking up to 24 units back to a single PC using RS485 and Toolmon software for data collection

? Panel door mounted

? Independent limits for Break, Blunt, Missing and Idle supervision

? Touch Point limit used for grinding and balancing machines

? Low cost system